2001/04/09 Caterpillar


Addition to Specification , "Cab Mounting Group (ROPS)" {7301, 7323}

Usage:

R1700G 8XZ
Load Haul Dump (LHD):
R1600 (S/N: 9EW)
R1700G (S/N: 8XZ)
Specifications, RENR4620 (9EP0559), "Cab Mounting Group (ROPS)"Specifications, RENR4659 (9EP5389), "Cab Mounting Group (ROPS)"

The torque for the bolts that fasten the cab to the mounts for the enclosed and open ROPS have been added to the Specifications Module. Refer to the additional information that follows:




Illustration 1g00787166

View of the ROPS Cab Mounting (Typical)

(1) Apply 4C-9507 Retaining Compound to the threads of bolts (1) prior to assembly. Torque for the two bolts ... 1300 ± 150 N·m (960 ± 110 lb ft)

(2) Apply 4C-9507 Retaining Compound to the threads of bolts (2) prior to assembly. Torque for the three bolts ... 900 ± 100 N·m (660 ± 75 lb ft)

Caterpillar Information System:

3126B Engines for Caterpillar Built Machines Lifter Group - Remove and Install
TK1051 Track Feller Buncher Machine Systems Travel Motor Case Drain Oil - Measure
816F Landfill Compactor, 815F Soil Compactor and 814F Wheel Dozer Axle Oscillation Bearings - Lubricate
TK1051 Track Feller Buncher Machine Systems Piston Motor (Swing Drive) Case Drain Oil - Measure
735 Articulated Truck Power Train Power Train Electronic Control System
725, 730, 735, 740 and 740 Ejector Articulated Trucks Caterpillar Monitoring System MID 030 - CID 0110 - FMI 08
TK1051 Track Feller Buncher Machine System Stick
735 Articulated Truck Power Train Transmission Hydraulic Control
725, 730, 735, 740 and 740 Ejector Articulated Trucks Caterpillar Monitoring System MID 030 - CID 0100 - FMI 08
TK1051 Track Feller Buncher Machine Systems Piston Pump (Disc Saw) - Test and Adjust
236, 246, 252 and 262 Skid Steer Loaders Machine Systems Control Valve (Work Tool) - Assemble
533 and 543 Wheel Feller Bunchers Hydraulic System Oil Filter - Replace
2001/04/16 Correction to Operator's Station and Electrical System {1408}
12H, 140H, 143H, 160H and 163H Motor Graders Hydraulic and Steering System Relief Valve (Ripper)
Caterpillar<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> AP-900B and Barber-Greene<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> BG-240C Asphalt Pavers Maintenance Interval Schedule
TK1051 Track Feller Buncher Machine Systems Pilot System Pressure - Test
2001/04/09 Improved Parking Brake Oil Pressure Switches are Available {1408}
120H and 135H Motor Graders Hydraulic and Steering System Relief Valve (Scarifier)
2001/04/16 A New Procedure Is Used to Install the Cleaner Assembly on Landfill Compactors {7160}
725, 730, 735, 740 and 740 Ejector Articulated Trucks Caterpillar Monitoring System MID 030 - CID 0177 - FMI 04
2001/04/09 Addition to Specifications , "Cab Mounting Group (ROPS)" {7323}
725, 730, 735, 740 and 740 Ejector Articulated Trucks Caterpillar Monitoring System MID 030 - CID 0177 - FMI 08
Comfort Series Seat For Caterpillar Machines Comfort Seat with Lumbar Option and Side Controls - Assemble
TH103 Telehandler Braking System General Information
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.