A Hardware Kit Is Available for the Governor Pedal {1276}
- Integrated Toolcarrier:
- IT14G (S/N: 1WN1-UP; 8ZM1-UP)
- Wheel Loader:
- 910G HYSTAT (S/N: AKR1-UP)
- IT28G (S/N: 8CR1-UP; 9AR1-UP)
- IT38G (S/N: 1CW1-UP; 7BS1-UP)
- 914G (S/N: 7ZM1-UP; 9WM1-UP)
- 924G (S/N: 3PZ1-UP; 9SW1-UP; AAN1-UP)
- 924GZ (S/N: 3DZ1-UP; 6YW1-UP; AAB1-UP)
- 928G (S/N: 6XR1-UP; 7SR1-UP)
- 938G (S/N: 4YS1-UP; 6WS1-UP; 8RS1-UP; 9HS1-UP)
Show/hide table
Required Parts     | |||
Item     | Part Number     | Description     | Qty     |
1     | 175-3976     | Hardware Kit     | 1     |
2     | 8T-4742     | Yoke Rod End     | 1     |
3     | 8T-4744     | Spring Pin Assembly     | 1     |
The 175-3976 Hardware Kit (1) is available in order to repair the 154-0263 Pedal. The pedal is part of the 107-4627 Governor Pedal . The 8T-4742 Yoke Rod End and the 8T-4744 Spring Pin Assembly are available in order to connect the cable to the pedal. See Illustration 1.
Show/hide table
Illustration 1 | g00874049 |
Caterpillar Information System:
725, 730, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System MID 027 - CID 0725 - FMI 05
3176C Engine for Caterpillar Built Machines CID 0376 FMI 05 Travel Alarm open circuit
938G Wheel Loader and IT38G Integrated Toolcarrier Hydraulic System Fan Drive Speed - Test and Adjust
725, 730, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System MID 027 - CID 0725 - FMI 03
725, 730, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System MID 027 - CID 0724 - FMI 06
797 Off-Highway Truck Braking System Oil Filter (Front Brake Cooling)
725, 730, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System MID 027 - CID 0724 - FMI 05
2001/01/08 A New Circle Assembly for the Moldboard Improves Service Life in Some Applications {6152, 6154, 6155}
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Machine Systems Lift Arms - Install
3176C and 3406E Engines for D7R Series II and D8R Series II Track-Type Tractors CID 0264 FMI 08 Decel Throttle Position signal abnormal
725, 730, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System MID 027 - CID 0724 - FMI 03
3406E Engine for Caterpillar Built Machines CID 0041 FMI 04 8 Volt DC Supply short to ground
725, 730, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System MID 027 - CID 0725 - FMI 06
725, 730, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System MID 027 - CID 0739 - FMI 03
3176C Engine for Caterpillar Built Machines CID 0376 FMI 06 Travel Alarm short to ground
797 Off-Highway Truck Fan Drive Hydraulic System Oil Filter (Steering/Fan Drive)
938G Wheel Loader and IT38G Integrated Toolcarrier Hydraulic System Fan Drive Speed (On Demand Fan) - Test and Adjust
3176C and 3406E Engines for D7R Series II and D8R Series II Track-Type Tractors Cat Data Link Circuit - Test
797 Off-Highway Truck Fan Drive Hydraulic System Oil Filter (Steering/Fan Drive)
C-15 and C-16 Industrial Engines Camshaft
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Machine Systems Pilot Valve (Loader) - Assemble
2000/12/04 A Special Instruction, REHS0818, "Field Installation of an Axle Oil Cooler" is Available {1365}
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Machine Systems Bank Valve (Backhoe) - Assemble
TH103 Telehandler Hydraulic System Bank Valve