|
Directional Turn Signal (1) - Push up on the control (switch) in order to activate the left turn signal, if equipped. Pull down on the switch in order to activate the right turn signal. The mid-position is the OFF position.
|
|
Window Wiper (2) - This is a three-position switch, if equipped. Position (0) is the OFF position. Rotate the switch counterclockwise by one click in order to operate the wiper motor at slow speed. Rotate the switch counterclockwise by an extra click in order to operate the wiper motor at high speed.
|
|
Window Washer (3) - Push in the spring loaded button in order to activate the washer motor, if equipped.
|
|
Dimmer Control (4) - This is a three-position switch. Push the switch forward for the HIGH BEAM position. The switch for the roading lights which is located on the instrument panel must be in the HEADLIGHTS position in order to activate the high beam. The headlights remain on high beam until the switch is pulled backward to the LOW BEAM position. Pull the switch fully backward and hold the switch in order to flash the high beam headlights. The high beam headlights will flash when the switch for the roading lights is in any position. The headlights will be switched to the LOW BEAM position when the switch is released.
|
