Brake Control Valve (Service)
Show/hide table
 | |
| Illustration 1 | g00103581 |
201-3198 Brake Control Valve (1) Return ports to the hydraulic oil tank. (2) Supply ports from the brake accumulator charging valve. (3) Supply ports to the service brakes. | |
(A) Height of installed valve ... 29.7 mm (1.17 inch)
(B) Height of the valve with the service brake in the FULLY APPLIED position ... 20.6 mm (0.81 inch)
Service brake pressure ... 6900 ± 345 kPa (1000 ± 50 psi)
Note: The output pressure of the upper port is higher than the output pressure of the lower port. Refer to table 1 that follows for the value of the pressure difference.
Show/hide table
| Pressure Difference | |
| 130-4917 Brake Control Valve (Service) |
350 kPa (30 psi) |
| 201-3198 Brake Control Valve (Service) |
207 kPa (30 psi) |
Caterpillar Information System:
3034 Engine for Caterpillar Built Machines Crankshaft Gear - Remove and Install
140H and 160H Motor Graders Circle Top - Lubricate
980G Wheel Loader, 824G Wheel Dozer, 825G Soil Compactor and 826G Landfill Compactor Implement Electronic Control System MID 082 - CID 0352 - FMI 13
988G Wheel Loader Electrohydraulic System MID 082 - CID 0650 - FMI 12
140H and 160H Motor Graders Circle Drive Pinion Teeth - Lubricate
834G Wheel Dozer and 836G Landfill Compactor Electrohydraulic System MID 082 - CID 0353 - FMI 04
140H and 160H Motor Graders Circle Drive Oil Level - Check
24H Motor Grader Engine Crankcase Breather - Clean
980G Wheel Loader, 824G Wheel Dozer, 825G Soil Compactor and 826G Landfill Compactor Implement Electronic Control System MID 082 - CID 0353 - FMI 13
980G Wheel Loader, 824G Wheel Dozer, 825G Soil Compactor and 826G Landfill Compactor Implement Electronic Control System MID 082 - CID 0353 - FMI 01
3114, 3116, and 3126 Engines Fuel Timing Dimension - Adjust
776D Wheeled Tractor and 777D and 777D HAA Off-Highway Trucks Power Train Transmission and Transfer Gears - Connect
834G Wheel Dozer and 836G Landfill Compactor Electrohydraulic System MID 082 - CID 0296 - FMI 12
24H Motor Grader Engine Oil Level - Check
797 Off-Highway Truck Power Train Relief Valve (Rear Axle Motor Unloader) - Assemble
776D Wheeled Tractor and 777D and 777D HAA Off-Highway Trucks Power Train Transfer Gears - Disassemble
584 and 584HD Forwarders General Hazard Information
24H Motor Grader Engine Oil Sample - Obtain
2000/04/24 Correction to Testing and Adjusting for the Stall Test {1000, 3030, 3101}
988G Wheel Loader Electrohydraulic System MID 082 - CID 0352 - FMI 04
988G Wheel Loader Electrohydraulic System MID 082 - CID 0353 - FMI 03
12H Motor Grader Circle Drive Pinion Teeth - Lubricate
2001/01/29 New Improved Transmission Control {3168}
2000/04/24 The Grab Handle for Use with the Cab Door Has Been Redesigned {7308}