Oil Filter Base
Usage:
Disassemble Oil Filter Base
Start By:
a. remove oil filter and base
1. Remove two covers (1) that hold the valves in the oil filter base.
2. Remove spring (5) and bypass valve (3) for the oil cooler. Remove spring (4) and valve (2) for the oil filter. Put identification marks on the two springs and valves as to their location in the base.
Assemble Oil Filter Base
1. Inspect all O-ring seals, and make replacements if needed.
NOTE: Be sure to install valve (1) and bypass valve (4) in their respective locations in the oil filter base.
2. Install valve (1) and spring (2) for the oil filter.
3. Install cover (3).
4. Install bypass valve (4) and spring (5) for the oil cooler.
5. Install the cover over the bypass valve and spring.
End By:
a. install oil filter and base
Caterpillar Information System:
3406C DIESEL TRUCK ENGINE Oil Filter And Base
3406C DIESEL TRUCK ENGINE Water Temperature Regulator (Ford)
3406C DIESEL TRUCK ENGINE Water Temperature Regulator And Manifold
3406C DIESEL TRUCK ENGINE Turbocharger (Later)
3406C DIESEL TRUCK ENGINE Turbocharger (Earlier)
3406C DIESEL TRUCK ENGINE Fuel Injection Pump Housing
3406C DIESEL TRUCK ENGINE Fuel Injection Pumps
3406C DIESEL TRUCK ENGINE Governor
3406C DIESEL TRUCK ENGINE Fuel Injection Pump Housing And Governor
3406C DIESEL TRUCK ENGINE Automatic Timing Advance
3406C DIESEL TRUCK ENGINE Fuel Ratio Control
3406C DIESEL TRUCK ENGINE Fuel Transfer Pump
3406C DIESEL TRUCK ENGINE Exhaust Manifold
3406C DIESEL TRUCK ENGINE Alternator And Mounting Group
3406C DIESEL TRUCK ENGINE Water Pump
3406C DIESEL TRUCK ENGINE Valve Covers
3406C DIESEL TRUCK ENGINE Rocker Shaft Assemblies And Push Rods
3406C DIESEL TRUCK ENGINE Rocker Shaft Assemblies
3406C DIESEL TRUCK ENGINE Valve Lifters
3406C DIESEL TRUCK ENGINE Fuel Injection Nozzles And Adapters
3406C DIESEL TRUCK ENGINE Cylinder Head Assembly
3406C DIESEL TRUCK ENGINE Spacer Plate
3406C DIESEL TRUCK ENGINE Valves
3406C DIESEL TRUCK ENGINE Valve Seat Inserts