143H and 163H Motor Graders All Wheel Drive Caterpillar


Operational Checks

Usage:

143H 1AL
The operation checks can be used to find leakage in the all wheel drive system. Also, the operation checks can help diagnose poor performance.



    Illustration 1g00501070

    (1) All wheel drive control

  1. Start the engine. Turn all wheel drive control (1) to the MANUAL position or the AUTOMATIC position.

  1. Listen for noise from the all wheel drive piston pump.



    Illustration 2g00501069

    (2) Torque control lever

  1. Put the transmission direction and speed control in a gear and operate the machine. Move torque control lever (2) several times from the MINIMUM position to the MAXIMUM position.

  1. Stop the machine. Engage the parking brake.

    ------ WARNING! ------

    Do not check for leaks with your hands. Pin hole (very small) leaks can result in a high velocity oil stream that will be invisible close to the hose. This oil can penetrate the skin and cause personal injury. Use cardboard or paper to locate pin hole leaks.

    ----------------------

  1. At the following components, check the hoses, the lines, the connections and the components for leakage:

    • The hydraulic oil tank

    • The hydraulic oil cooler

    • The all wheel drive filter

    • The all wheel drive gear pump

    • The all wheel drive piston pump

    • The flushing and cooling control valve

    • The all wheel drive control valve

    • The all wheel drive piston motors

    • The all wheel drive accumulators

Caterpillar Information System:

784C, 785C and 785C HAA Off-Highway Truck/Tractors Hydraulic System Hydraulic System Schematic
769D Off-Highway Truck and 771D Quarry Truck Breather (Differential and Final Drive) - Replace
550 Wheel Harvester, 570 Wheel Harvester and 580 Wheel Harvester Hydraulic System Oil Filter (Implement Case Drain)
769D Off-Highway Truck and 771D Quarry Truck Differential Thrust Pin Clearance - Check
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) CID 0171 FMI 03 Temperature Sensor (Ambient Air) Voltage Above Normal - Test
143H and 163H Motor Graders All Wheel Drive Visual Inspection
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) CID 0110 FMI 06 Temperature Sensor (Engine Coolant) Current Above Normal - Test
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) CID 0110 FMI 04 Temperature Sensor (Engine Coolant) Voltage Below Normal - Test
980G Wheel Loader Power Train Transmission Hydraulic Control Valve - Disassemble
769D Off-Highway Truck and 771D Quarry Truck Cooling System Relief Valve - Clean
769D Off-Highway Truck and 771D Quarry Truck Cooling System Pressure Cap - Clean/Replace
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) CID 0110 FMI 03 Temperature Sensor (Engine Coolant) Voltage Above Normal - Test
966F Series II Wheel Loader Power Train Differential Pinion - Disassemble
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Hydraulic System Relief Valve (Line) - Test and Adjust
Caterpillar Monitoring System Switches
966F Series II Wheel Loader Power Train Differential Pinion - Assemble
3304B and 3306B Engines for Caterpillar Built Machines Engine Oil Filter Base - Disassemble
550 Wheel Harvester, 570 Wheel Harvester and 580 Wheel Harvester Hydraulic System Hydraulic Tank Fill Pump and Motor
988G Wheel Loader Cooling System Water Temperature Regulator - Replace
IT14G Integrated Toolcarrier and 914G Wheel Loader Engine Supplement Muffler - Remove and Install
550 Wheel Harvester, 570 Wheel Harvester and 580 Wheel Harvester Hydraulic System Pressure Reducing Valve (Swing Brake)
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) CID 0171 FMI 04 Temperature Sensor (Ambient Air) Voltage Below Normal - Test
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) CID 0171 FMI 06 Temperature Sensor (Ambient Air) Current Above Normal - Test
769D Off-Highway Truck and 771D Quarry Truck Differential and Final Drive Oil - Change
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.