Illustration 1 | g00470073 |
There are two exterior mirrors (1) on the machine. There is one mirror for each side of the machine. The length of the mirror mounting bracket can be adjusted by loosening the knurled knob. When the mirrors are in the desired position, tighten the knurled knob in order to hold the mirrors in place. The angle and the height of the mirrors can be adjusted manually. The left mirror can be folded in the forward direction. This allows better access to the cab. Make sure that the mirror is in the operating position before you operate the machine.
A mirror (2) for starting the machine is provided on the right side of the machine. Before you start the engine and before you move the machine, use this mirror to make sure that no one is around the right side of the machine. The mirror can be adjusted manually.
The rearview mirror (3) is provided in order to view the implements while you are operating the machine. Move the mirror for the best angle. If the mirror is too tight, loosen the screws on the back of the mirror. This allows the ball joint to rotate. When the adjustment is complete, tighten the screws in order to hold the mirror in place.