Spacer Plate
Usage:
Remove Spacer Plate
START BY:
a. remove cylinder head assembly
1. Remove spacer plate (1) from the cylinder block.
Show/hide table
NOTICE |
---|
Do not cause damage to the dowels. |
2. Remove the spacer plate gasket and two O-ring seals.
Install Spacer Plate
1. Thoroughly clean the spacer plate and cylinder block surface. Install two O-ring seals (1) in the cylinder block.
Show/hide table
NOTICE |
---|
Both surfaces of the spacer plate, top of cylinder block and both sides of the spacer plate gasket must be clean and dry. Gasket adhesives or other substances must not be used on these surfaces. |
2. Install a new gasket between the spacer plate and cylinder block. Put spacer plate (2) in position on the cylinder block.
3. Check cylinder liner projection. See Install Cylinder Liners.
END BY:
a. install cylinder head assembly
Caterpillar Information System:
3406B DIESEL TRUCK ENGINE Cylinder Head Assembly
3406B DIESEL TRUCK ENGINE Aftercooler Housing
3406B DIESEL TRUCK ENGINE Aftercooler Core
3406B DIESEL TRUCK ENGINE Fuel Injection Nozzles And Adapters (Later)
3406B DIESEL TRUCK ENGINE Fuel Injection Nozzle Adapters (Earlier)
3406B DIESEL TRUCK ENGINE Fuel Injection Nozzles (Earlier)
3406B DIESEL TRUCK ENGINE Valve Lifters
3406B DIESEL TRUCK ENGINE Rocker Shaft Assemblies
3406B DIESEL TRUCK ENGINE Rocker Shaft Assemblies And Push Rods
3406B DIESEL TRUCK ENGINE Valve Covers
3406B DIESEL TRUCK ENGINE Water Pump
3406B DIESEL TRUCK ENGINE Alternator And Mounting Group
3406B DIESEL TRUCK ENGINE Valves
3406B DIESEL TRUCK ENGINE Valve Seat Inserts
3406B DIESEL TRUCK ENGINE Bridge Dowels
3406B DIESEL TRUCK ENGINE Valve Guides
3406B DIESEL TRUCK ENGINE Oil Pan
3406B DIESEL TRUCK ENGINE Flywheel
3406B DIESEL TRUCK ENGINE Oil Pump
3406B DIESEL TRUCK ENGINE Piston Cooling Tubes
3406B DIESEL TRUCK ENGINE Connecting Rod Bearings
3406B DIESEL TRUCK ENGINE Crankshaft Main Bearings
3406B DIESEL TRUCK ENGINE Pistons And Connecting Rod Assemblies
3406B DIESEL TRUCK ENGINE Crankshaft