| NOTICE |
|---|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products. Dispose of all fluids according to local regulations and mandates. |
 | |
| Illustration 1 | g00401978 |
The bottle for the windshield washer fluid is located in the left fender in front of the hydraulic tank.
 | |
| Illustration 2 | g00401980 |
 | |
| Illustration 3 | g00401982 |
There are two sight gauges for the washer fluid bottle. One sight gauge is located in front of the washer fluid bottle. When you are underneath the fender, the bottle is visible. The other sight gauge is located on the side of the washer fluid bottle. When you are standing next to the machine, the bottle is visible through the slit in the fender.
 | |
| Illustration 4 | g00401983 |
Remove the cap in order to fill the washer fluid bottle with commercially available windshield washer fluid.
| NOTICE |
|---|
Use Caterpillar nonfreezing window washer solvent or a commercially available windshield washer fluid in order to prevent freezing of the windshield washer system. |
Note: In order to find information about the refill capacity of the washer fluid bottle, see Operation and Maintenance Manual, "Refill Capacities".