Illustration 1 | g00340632 |
Tolerance for all pin diameters ...
Place an equal number of washers on each side of each pin joint.
(A) 9R-8724 Guide Assembly
(B) 9R-7699 Link Assembly
(1) 9R-8663 Pin from the stick to the stick cylinder for 416C, 428C, and 438C machines
- Diameter ...
55.000 mm (2.1654 inches) - Length ...
337.5 mm (13.29 inches) - Length ...
- Diameter ...
60.000 mm (2.3622 inches) - Length ...
350.5 mm (13.80 inches) - Length ...
9R-8709 Pin from the stick to the stick cylinder for 426C and 436C machines
(2) 9R-8664 Pin from the stick to the boom for 416C, 428C, and 438C machines
- Diameter ...
55.000 mm (2.1654 inches) - Length ...
363 mm (14.3 inches) - Length ...
- Diameter ...
60.000 mm (2.3622 inches) - Length ...
383 mm (15.1 inches) - Length ...
9R-8708 Pin from the stick to the boom for 426C and 436C machines
(3) 9R-8662 Pin from the bucket cylinder to the stick for 416C, 428C, and 438C machines
- Diameter ...
50.000 mm (1.9685 inches) - Length ...
336.2 mm (13.24 inches) - Length ...
- Diameter ...
50.000 mm (1.9685 inches) - Length ...
351.2 mm (13.83 inches) - Length ...
9R-8707 Pin from the bucket cylinder to the stick for 426C and 436C machines
(4) 9R-9812 Pin from the boom to the stick cylinder for 416C, 428C, and 438C machines
- Diameter ...
55.000 mm (2.1654 inches) - Length ...
240 mm (9.45 inches) - Length ...
- Diameter ...
60.000 mm (2.3622 inches) - Length ...
248 mm (9.76 inches) - Length ...
9R-9049 Pin from the boom to the stick cylinder for 426C and 436C machines
(5) 9R-9812 Pin from the boom to the boom cylinder for 416C, 428C, and 438C machines
- Diameter ...
55.000 mm (2.1654 inches) - Length ...
240 mm (9.45 inches) - Length ...
- Diameter ...
60.000 mm (2.3622 inches) - Length ...
248 mm (9.76 inches) - Length ...
9R-9049 Pin from the boom to the boom cylinder for 426C and 436C machines
(6) 9R-7696 Pin from the guide to the stick
- Diameter ...
45.000 mm (1.7716 inches) - Length ...
310 mm (12.2 inches) - Length ...
(7) 9R-6162 Pin from the stick to the bucket
- Diameter ...
50.000 mm (1.9685 inches) - Length ...
391 mm (15.4 inches) - Length ...
(9) 9R-7696 Pin from the link to the cylinder
- Diameter ...
45.000 mm (1.7716 inches) - Length ...
310 mm (12.2 inches) - Length ...
(10) 9R-6161 Pin from the link to the bucket
- Diameter ...
45.000 mm (1.7716 inches) - Length between the centers of the pin holes ...
307 ± 0.50 mm (12.09 ± 0.02 inches) - Length between the centers of the pin holes ...
(11) 9R-8580 Pin from the swing frame to the boom cylinder for 416C, 428C, and 438C machines
- Diameter ...
55.00 mm (2.165 inches) - Length ...
240 mm (9.31 inches) - Length ...
- Diameter ...
60.00 mm (2.362 inches) - Length ...
235 mm (9.30 inches) - Length ...
9R-8732 Pin from the swing frame to the boom cylinder for 426C and 436C machines
(12) 101-4022 Pin from the swing frame to the frame for 416C, 426C, and 436C machines
- Diameter ...
65.00 mm (2.559 inch) - Length ...
115.0 mm (4.528 inches) - Length ...
- Diameter ...
65.00 mm (2.559 inch) - Length ...
115.0 mm (4.528 inches) - Length ...
9R-8577 Pin from the swing frame to the frame for 428C, and 438C machines
(13) 130-0485 Pin from the swing frame to the boom for 416C, 428C, and 438C
- Diameter ...
55.00 mm (2.165 inches) - Length ...
130.0 mm (5.118 inches) - Length ...
- Diameter ...
60.00 mm (2.362 inches) - Length ...
155.0 mm (6.102 inches) - Length ...
130-2533 Pin from the swing frame to the boom for 426C and 436C
(14) 9R-8579 Pin from the swing to the swing cylinder for the right side and for the left side
- Diameter ...
50 mm (1.969 inch) - Length ...
162.5 ± 0.50 mm (6.398 ± 0.02 inches) - Length ...
(15) 9R-0234 Pin from the swing to the loader frame
- Diameter ...
65.00 mm (2.559 inches) - Length ...
117.0 ± 0.50 mm (4.606 ± 0.02 inches) - Torque for the nut ...
1250 ± 135 N·m (922 ± 100 lb ft) - Length ...
9R-2956 Pin for the rod end of the extendable stick cylinder
- Diameter ...
35.0 mm (1.38 inches) - Length ...
115.0 mm (4.528 inches) - Length ...
9R-8202 Pin for the head end of the extendable stick (416C, 428C, and 438C machines)
- Diameter ...
34.9 mm (1.37 inches) - Length ...
218.0 mm (8.583 inches) - Length ...
9R-9962 Pin for the head end of the extendable stick cylinder (426C and 436C machines)
- Diameter ...
228.0 mm (8.976 inches) - Length ...
34.9 mm (1.37 inches) - Length ...
Linkage Pins for the Stabilizers
Center Pivot Machines (416C, 426C, and 436C)
(8B) 9R-0423 Pin from the stabilizer cylinder to the frame
- Diameter ...
40.00 mm (1.575 inches) - Length ...
185.0 mm (7.283 inches) - Length ...
(16B) 9R-0423 Pin from the stabilizer cylinder to the stabilizer
- Diameter ...
40.00 mm (1.575 inches) - Length ...
185.0 mm (7.283 inches) - Length ...
(17) 9R-0424 Pin from the stabilizer to the stabilizer pad
- Diameter ...
45.00 mm (1.772 inches) - Length ...
307.0 mm (12.09 inches) - Length ...
(18) 9R-0424 Pin from the stabilizer to the frame
- Diameter ...
45.00 mm (1.772 inches) - Length ...
307.0 mm (12.09 inches) - Length ...
Sideshift Machines (428C and 438C)
(8A) 9R-6785 Pin from the stabilizer cylinder to the frame
- Diameter ...
45.00 mm (1.772 inches) - Length ...
222.0 mm (8.740 inches) - Length ...
(16A) 126-5708 Pin from the stabilizer cylinder to the stabilizer pad
- Diameter ...
45.00 mm (1.772 inches) - Length ...
133.0 mm (5.236 inches) - Length ...
Bearings for the Backhoe Linkage (All Machines)
Tolerance for all bearing inside diameters ...
Tolerance for all bearing widths ...
(1) 9R-0139 Sleeve Bearings for the stick cylinder on 416C, 428C, and 438C machines
- Inside diameter after assembly ...
55.243 mm (2.1749 inches) - Bearing width ...
38.0 mm (1.50 inches) - Bearing width ...
- Inside diameter ...
60.315 mm (2.3746 inches) - Bearing width ...
41.0 mm (1.61 inches) - Bearing width ...
9R-6515 Sleeve Bearings for the stick cylinder on 426C and 436C machines
(2) 9R-0170 Sleeve Bearings for the boom on 416C, 428C, and 438C machines
- Inside diameter after assembly ...
55.243 mm (2.1749 inches) - Bearing width ...
45.0 mm (1.77 inches) - Bearing width ...
- Inside diameter ...
60.315 mm (2.3746 inches) - Bearing width ...
41.0 mm (1.61 inches) - Bearing width ...
9R-6515 Sleeve Bearings for the stick cylinder on 426C and 436C machines
(3) 9R-3092 Sleeve Bearings for the stick on 416C, 428C, and 438C machines
- Inside diameter after assembly ...
50.243 mm (2.1749 inches) - Bearing width ...
38.0 mm (1.50 inches) - Bearing width ...
- Inside diameter ...
60.315 mm (2.3746 inches) - Bearing width ...
41.0 mm (1.61 inches) - Bearing width ...
9R-6515 Sleeve Bearings for the stick cylinder on 426C and 436C machines
- Inside diameter ...
45.295 mm (1.7817 inches) - Bearing width ...
34.0 mm (1.34 inches) - Bearing width ...
9R-0411 Sleeve Bearings for the extendable stick
(4) 9R-0139 Sleeve Bearings for the stick cylinder on 416C, 428C, and 438C machines
- Inside diameter after assembly ...
55.243 mm (2.1749 inches) - Bearing width ...
38.0 mm (1.50 inches) - Bearing width ...
- Inside diameter ...
60.315 mm (2.3746 inches) - Bearing width ...
41.0 mm (1.61 inches) - Bearing width ...
9R-6515 Sleeve Bearings for the stick cylinder on 426C and 436C machines
(5) 9R-0139 Sleeve Bearings for the boom cylinder on 416C, 428C, and 438C machines
- Inside diameter after assembly ...
55.243 mm (2.1749 inches) - Bearing width ...
38.0 mm (1.50 inches) - Bearing width ...
- Inside diameter ...
60.315 mm (2.3746 inches) - Bearing width ...
41.0 mm (1.61 inches) - Bearing width ...
9R-6515 Sleeve Bearings for the boom cylinder on 426C and 436C machines
(6) 9R-0153 Sleeve Bearings for the guide
- Inside diameter after assembly ...
45.250 mm (1.7815 inches) - Bearing width ...
18.0 mm (0.71 inch) - Bearing width ...
(7) 9R-3092 Sleeve Bearings for the stick to the bucket
- Inside diameter after assembly ...
55.243 mm (2.1749 inches) - Bearing width ...
38.0 mm (1.50 inches) - Bearing width ...
9R-3092 Sleeve Bearings for the bucket
- Inside diameter after assembly ...
55.243 mm (2.1749 inches) - Bearing width ...
38.0 mm (1.50 inches) - Bearing width ...
(9) 9R-0153 Sleeve Bearings for the link
- Inside diameter after assembly ...
45.250 mm (1.7815 inches) - Bearing width ...
18.0 mm (0.71 inch) - Bearing width ...
(10) 9R-0431 Sleeve Bearings for the bucket to the link assembly
- Inside diameter after assembly ...
45.251 mm (1.7815 inches) - Bearing width ...
32.0 mm (1.26 inches) - Bearing width ...
9R-0147 Bearings for the link
- Inside diameter after assembly ...
45.255 mm (1.7817 inches) - Bearing width ...
40.0 mm (1.57 inches) - Bearing width ...
(12) 102-4560 Sleeve Bearings for the upper plate of the loader frame
- Inside diameter after assembly ...
65.241 mm (2.5685 inches) - Bearing width ...
43.0 mm (1.69 inches) - Bearing width ...
(13) 9R-9475 Sleeve Bearings for the boom
- Inside diameter after assembly ...
55.143 mm (2.1710 inches) - Bearing width ...
50.0 mm (1.97 inches) - Bearing width ...
(14) 9R-9505 Sleeve Bearings for the swing cylinder
- Inside diameter ...
50.152 mm (1.9745 inches) - Bearing width ...
23.0 mm (0.91 inch) - Bearing width ...
(15) 9R-0413 Bearings for the lower plate of the loader frame
- Inside diameter after assembly ...
65.242 mm (2.5686 inches) - Bearing width ...
48.0 mm (1.89 inches) - Bearing width ...
9R-0411 Sleeve Bearings for the stabilizer
- Inside diameter after assembly ...
45.241 mm (1.7811 inches) - Bearing width ...
34.0 mm (1.346 inches) - Bearing width ...
9R-4110 Sleeve Bearings for the pivot of the swing cylinder on the lower plate of the loader frame
- Inside diameter after assembly ...
70.155 mm (2.7620 inches) - Bearing width ...
32.0 mm (1.26 inches) - Bearing width ...
9R-4110 Sleeve Bearings for the swing cylinder cap assembly
- Inside diameter after assembly ...
70.142 mm (2.7615 inches) - Bearing width ...
32.0 mm (1.26 inches) - Bearing width ...