General Information
Illustration 1 | g00332778 |
Component Location (1) Diagnostic service tool connector. (2) Machine harness code connector. (3) Service connector for the 4C-8195 Control Service Tool (switch box). |
The harness code connector, the service connector for the 4C-8195 Control Service Tool (switch box), and the diagnostic service tool connector are located behind the fuse access cover in the right rear panel of the cab.
Illustration 2 | g00332799 |
Right Rear Corner of Cab (4) Power Train Electronic Control Module, mounted to the side panel of the cab. |
The Electrical System Schematic, Parts Manual and Operation and Maintenance Manual for the machine that is being serviced should be used to locate electrical components and connectors.
The following information is a guide to reading the tables on the back of the Electrical System Schematic.
- The "Component Location" table uses white circles to mark the locations in the profile of the machine and in the area views. Alphabetical letters in the "Machine Location" column indicate a general area of the machine. Refer to the corresponding footnote at the end of the table for a description of the location.
- The "Harness Connector Location" table uses white circles to mark the locations in the general view and in the area views. Alphabetical letters in the "Machine Location" column indicate a general area of the machine. Refer to the corresponding footnote at the end of the table for a description of the location.
Reference: For more information on the electrical system and components of a 950G Wheel Loader, 962G Wheel Loader and a IT62G Integrated Toolcarrier that is equipped with Conventional Steering, refer to the Service Manual module Schematic, SENR1393, "950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Electrical System".
Reference: For more information on the electrical system and components of a 950G Wheel Loader and a 962G Wheel Loader that is equipped with Command Control Steering, refer to the Service Manual module Schematic, RENR2140, "950G Wheel Loader and 962G Wheel Loader Electrical System".
Reference: For more information on the operation of the machine, refer to the Service Manual module Operation and Maintenance Manual for the machine that is being serviced.
Reference: For more information on the operation of the electrical components of the machine, refer to the appropriate Parts Manual for the machine that is being serviced.
Connector Contact Numbers
Illustration 3 | g00487444 |
Power Train ECM (5) Connector J1. (6) Connector J2. |
Illustration 4 | g00487445 |
Power Train ECM (7) Screw. |
To remove the machine harness from the ECM, use screw (7) in the center of the harness connector.