Transmission Control
Show/hide table
 | |
| Illustration 1 | g00649555 |
The power shift transmission control lever controls the following transmission gears: neutral, three forward speeds and three reverse speeds. Move the power shift transmission control lever to the desired gear.
The parking brake lever must be pulled up in order to allow movement of the power shift transmission control lever.
Caterpillar Information System:
M318 and M320 Excavators Tire Inflation - Check - Pneumatic
561M Pipelayer Parking Brake Control
793B Off-Highway Truck Steering System Steering Tank and Filter
12H, 140H, 143H, 160H and 163H Motor Graders Power Train Transmission
561M Pipelayer Cooling System Water Temperature Regulator - Clean/Replace
D6R Track-Type Tractor Cooling System Extended Life Coolant - Change
992G Wheel Loader and 854G Wheel Dozer Steering System Relief Valve (Secondary Steering)
561M Pipelayer Idlers (Track)
992G Wheel Loader and 854G Wheel Dozer Steering System Check Valve (Steering Pilot)
561M Pipelayer Drawbar
515 Wheel Skidder and 525 Wheel Skidder Conventional Coolant/Antifreeze Cooling System Maintenance
561M Pipelayer Tracks
M318 and M320 Excavators Stabilizer Bearings - Lubricate - If Equipped
793B Off-Highway Truck Steering System Metering Pump (Steering)
572R Pipelayer Power Train Steering and Brake Control Valve
TK711, TK721, TK722 and TK732 Track Feller Bunchers Sound Information and Vibration Information
561M Pipelayer Additional Reference Material
3208 Marine Engine Battery Electrolyte Level - Check
992G Wheel Loader and 854G Wheel Dozer Power Train Speed Sensor (Torque Converter Output)
561M Pipelayer Priority Valve
793B Off-Highway Truck Oil Filter - Inspect
631E Series II Wheel Tractor-Scrapers Electrical Storm Injury Prevention
966G Wheel Loader and 972G Wheel Loader Braking System Accumulator Charging Valve (Brake)
561M Pipelayer Transmission and Torque Converter Pump