120H and 135H Motor Graders Power Train Caterpillar


Solenoid Valve (Transmission Clutch)

Usage:

135H NA 3YK



Illustration 1g00100987

Pressure rating

Nominal ... 2931 kPa (425.1 psi)
Minimum ... 0.0 kPa (0.0 psi)
Maximum ... 3100 kPa (449.6 psi)

Coil resistance at 25° ± 5°C (77.0° ± 9.0°F) ... 31 +/- 3 ohms

Orifices

Diameter of the inlet ... 1.52 mm (0.06 inch)
Diameter of the outlet ... 1.78 mm (0.07 inch)

Caterpillar Information System:

928G Wheel Loader Differential Oil Level - Check
12H, 140H, 143H, 160H and 163H Motor Graders Power Train Pressure Switch (Transmission Modulation)
120H and 135H Motor Graders Power Train Clutch Control (Modulation)
561M Pipelayer Transmission Controls and Parking Brake Linkage
120H and 135H Motor Graders Hydraulic and Steering System Control Valve (Blade Lift)
928G Wheel Loader Cooling System Water Temperature Regulator - Clean/Replace
IT62G Integrated Toolcarrier and 950G and 962G Wheel Loaders Radiator Core - Clean
12H, 140H, 143H, 160H and 163H Motor Graders Power Train Oil Filter (Power Train)
416C, 426C, 428C, 436C and 438C Backhoe Loaders Cooling System Coolant Extender (ELC) - Add
416C, 426C, 428C, 436C and 438C Backhoe Loaders Cooling System Coolant (ELC) - Change
120H and 135H Motor Graders Power Train Gear Pump (Transmission Charging and Scavenge)
120H and 135H Motor Graders Power Train Magnetic Screen (Transmission)
12H, 140H, 143H, 160H and 163H Motor Graders Power Train Transmission Control Valve
12H, 140H, 143H, 160H and 163H Motor Graders Power Train Selector and Pressure Control Valve
966G and 972G Wheel Loaders Braking System - Test
966G and 972G Wheel Loaders Brake Accumulator - Check
120H and 135H Motor Graders Hydraulic and Steering System Control Valve (Snow Plow/Dozer Lift)
12H, 140H, 143H, 160H and 163H Motor Graders Power Train Selector and Pressure Control Valve
IT14G Integrated Toolcarrier Engine Air Filter Primary Element - Clean/Replace
IT62G Integrated Toolcarrier and 950G and 962G Wheel Loaders Drive Shaft Spline (Center) - Lubricate
IT62G Integrated Toolcarrier and 950G and 962G Wheel Loaders Drive Shaft Support Bearing - Lubricate
IT62G Integrated Toolcarrier and 950G and 962G Wheel Loaders Bucket Lower Pivot Bearings - Lubricate
120H and 135H Motor Graders Power Train Drive Shaft
IT62G Integrated Toolcarrier and 950G and 962G Wheel Loaders Engine Governor Oil Supply Screen - Clean/Inspect/Replace
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.