928G Wheel Loader Caterpillar

Before you measure the oil level, operate the machine for a few minutes. This will allow all of the oil to reach a common level.

Park the machine on level ground. Lower the bucket and apply slight downward pressure. Engage the parking brake. Stop the machine.

Illustration 1	g00101850

1. Remove the dipstick/fill plug for the front differential. Check the oil level.

2. Maintain the oil level between the "ADD" mark and the "FULL" mark on the dipstick/fill plug. Add oil, if necessary. Replace the dipstick/fill plug.

Show/hide table



Illustration 2	g00101851

3. Remove the dipstick/fill plug for the rear differential. Check the oil level.

4. Maintain the oil level between the "ADD" mark and the "FULL" mark on the dipstick/fill plug. Add oil, if necessary. Replace the dipstick/fill plug.