Before/After
| PRODUCT SUPPORT PROGRAM FOR REPLACING THE SCREED EXTENDER CONTROL SWITCH ON CERTAIN AP1055F, AP1000F, AP655F, AND AP600F ASPHALT PAVERS |
7451 5639 1408
|
PS44956 |
NOTE: |
Caterpillar’s obligations under this Service Letter are subject to, and shall not apply in contravention of, the laws, rules, regulations, directives, ordinances, orders, or statutes of the United States, or of any other applicable jurisdiction, without recourse or liability with respect to Caterpillar.
|
NOTE: |
This Program must be administered either before or after failure.
In either case the decision whether to apply the Program is made by the dealer. When reporting the repair, use "PS44956" as the Part Number
and "7755" as the Group Number. If administered before failure, use "56" as the Warranty Claim Description Code and "T" as the SIMS Description code.
If administered after failure, use "96" as the Warranty Claim Description Code, and "Z" as the SIMS Description Code. |
NOTE: |
The information supplied in this service letter may not be valid after the termination date of this program.
Do not perform the work outlined in this Service Letter after the termination date without first contacting your Caterpillar product analyst. |
The existing screed extender control switch can fail on certain AP1055F, AP1000F, AP655F, and AP600F Ashpalt Pavers that are configured with SE50 V, SE50 VT, SE60 V, SE60 V XW, and SE60 VT XW Screeds. If the existing screed extender control switch fails it will trigger a fault on the screed control panel display. |
Qty |
Part Number |
Description |
2 |
4910878 |
SWITCH AS-ROCKER |
In order to allow equitable parts availability to all participating dealers, please limit your initial parts order to not exceed 18% of dealership population. This is an initial order recommendation only, and the ultimate responsibility for ordering the total number of parts needed to satisfy the program lies with the dealer.
|
Refer to the Service Manual if/as necessary and replace the screed extender control switch on both LH and RH screed control panels. |
Product smu/age whichever comes first |
Caterpillar |
Dealer Suggested |
Customer Suggested |
Parts % |
Labor Hrs% |
Parts % |
Labor Hrs% |
Parts % |
Labor Hrs% |
0-2000 hrs, 0-24 mo |
100.0% |
100.0% |
0.0% |
0.0% |
0.0% |
0.0% |
NOTE: This is a 1.5-hour job
|
|
Handle the parts in accordance with your Warranty Bulletin on warranty parts handling. |
|
|
|