Use 145-9342 Filter Crusher To Reduce Waste And Collect Oil {5720,0800}
Usage:
All Models
Warranty Category: G
Features/Benefits
-
- * Reduces used filters by approximately 80%
- * Crushes up to 120 filters per hour
- * Disposal container holds 2 to 3 times more crushed filters (reduces disposal cost)
- * Squeezes oil into a 55 gallon collection drum (recycled oil can be used or sold for heating)
- * Heavy-duty construction for durability and long life
- * Two-lever operation (safe and easy)
- * Works on most common sizes of filters
- * Reduces used filters by approximately 80%
NOTE: Do not crush fuel filters with this machine.
Specifications/Technical Information
- Overall size (h x w x l) - 290 x 91 x 102 cm (116.0 x 36.0 x 40.0 in)
- Containment opening size (h x w) - 43 x 23 cm (13.5 x 9.0 in)
- Maximum filter crushing area (h x dia.) - 58 x 24 cm (23.0 x 9.3 in)
- Cycle time up and down (no filter) - 19 seconds
- Cycle time up and down with typical filter - 26 seconds
- Crushing force - 27 metric tons (30 tons)
- Motor size - 5.6 kW (7.5 hp)
- Electrical requirements - 220/440 volt, 3 phase
- Used oil container (not included) - 208 L (55 gal)
- Containment opening size (h x w) - 43 x 23 cm (13.5 x 9.0 in)
145-9342 Filter Crusher
Caterpillar Information System:
1998/12/07 Use 144-0235 Belt Tension Gauge to Check Belt Tension {1357}
1998/12/07 Use 9U-5968 Hydrostatic Filter Group To Filter Contaminanted Oil {5050,5095,3030,3080}
1998/12/07 Use 131-5050 DataView Group And 131-5051 DataView Portable TechStation Group For Accurate Diagnostics {1000,3000,4000,5000,6000,0788}
1998/12/07 Identification Of External Terminals On Alternators {1405,1406,1400}
1998/12/07 New Remanufactured Water Pump Groups Available {1361}
1998/12/07 Tire Pressure On Rubber Tire Pavers {4203}
1998/12/07 Revised Special Instruction, SEHS8433-04, "Repair Of Wheel And Track Loader Lift Arms And Levers" Available {0374,6107,6116,6119}
1998/12/07 Procedure Available To Improve Service Life Of 7U-6300 Expansion Tank Group {1354,1350}
1998/12/07 Improved Clamps Eliminate Suction Line Leaks {5057,7554}
1998/12/07 Prevention Of Cracking Of 125-6961 A-Frame Support Assembly {7050}
1998/12/07 D&A Tooling Used On Certain Variable Speed Fan Clutch Assemblies Can Be Used On New Fan Clutch Assembly {0700,0714,1356}
1998/12/07 Turbocharger Exhaust Tubes Now Boxed To Prevent Water Accumulation In Turbocharger During Shipment {1061,1062}
1998/12/07 New 146-4080 Digital Multimeter Available For Troubleshooting Electronic Circuits {0115}
1998/12/07 Use 149-5138 Mechanical Push/Puller For Extra Force In General Purpose Applications {0700}
1998/12/07 Use 150-1782 Crossblock For 8B-7548 Push Puller
1998/12/07 Use 153-8537 A/C Component To Flush Air Conditioning Systems And Recycle Solvent {0757}
1998/12/07 Improved Battery Cable Available {1402}
1998/12/07 Use 143-4062, 143-4065, 143-4066 Auto ID Pressure Sensors With DataView {1000,3000,4000,5000,6000,0788}
1998/12/07 Use 153-9630 PWM-Analog Test Group-Sensor Adapter Kit For DataView {1000,3000,4000,5000,6000,0788}
1998/12/14 Service Magazine Article published In Error {5083}
1998/12/14 Grease Fittings May Have Been Over Tightened On Automatic Lubrication Injectors {7540}
1998/12/14 New Model Specific VIMS Keypad Command Window Cling Films Now Available {7601}
1998/12/14 New VIMS Main Module With Increased Service Life Used {7601}
1998/12/14 Gasket Kits For AP-1000 Model Engines {1124}