Use 9U-5968 Hydrostatic Filter Group To Filter Contaminanted Oil {5050,5095,3030,3080}
Usage:
All Models
Warranty: G
Features/Benefits
-
- * Used to filter out contamination (particles) after catastrophic pump or motor failure
- * 6 micron absolute rating
- * Works in closed-loop hydrostatic hydraulic systems
- * Simple to install, as rectifier block automatically routes oil through filter in correct flow direction, regardless of inlet and outlet connections.
- * Can be permanently attached to system or vehicle
- * Easily fitted with currently available quick disconnect fittings for fast and easy installation - one unit can serve several machines.
- * Used to filter out contamination (particles) after catastrophic pump or motor failure
Specifications/Technical Information
- Overall size - 300 x 250 x 558 mm (12.0 x 10.0 x 22.0 in)
- Maximum working pressure - 41,364 kPa (6000 psi)
- Flow rate - 342 lpm (90 gpm)
- Filter rating - 6 micron, absolute
- Inlet/outlet port connection - 1-1/4 inch quick disconnect
- Maximum working pressure - 41,364 kPa (6000 psi)
Service Parts
- 9U-5966 Filter Element, 6 Micron Absolute
- 9U-5969 Valve, Check
- 9U-5967 Valve Seal Kit, Check
- 4C-5093 Nipple, Quick Disconnect
- 4C-5094 Coupler, Quick Disconnect
- 9U-5969 Valve, Check
9U-5968 Hydrostatic Filter Group
Caterpillar Information System:
1998/12/07 Use 131-5050 DataView Group And 131-5051 DataView Portable TechStation Group For Accurate Diagnostics {1000,3000,4000,5000,6000,0788}
1998/12/07 Identification Of External Terminals On Alternators {1405,1406,1400}
1998/12/07 New Remanufactured Water Pump Groups Available {1361}
1998/12/07 Tire Pressure On Rubber Tire Pavers {4203}
1998/12/07 Revised Special Instruction, SEHS8433-04, "Repair Of Wheel And Track Loader Lift Arms And Levers" Available {0374,6107,6116,6119}
1998/12/07 Procedure Available To Improve Service Life Of 7U-6300 Expansion Tank Group {1354,1350}
1998/12/07 Improved Clamps Eliminate Suction Line Leaks {5057,7554}
1998/12/07 Prevention Of Cracking Of 125-6961 A-Frame Support Assembly {7050}
1998/12/07 D&A Tooling Used On Certain Variable Speed Fan Clutch Assemblies Can Be Used On New Fan Clutch Assembly {0700,0714,1356}
1998/12/07 Turbocharger Exhaust Tubes Now Boxed To Prevent Water Accumulation In Turbocharger During Shipment {1061,1062}
1998/12/07 Proper Adjustment Guidelines For Winch Control Linkages {5161}
1998/12/07 Cooling System Thermostat To Be Replaced At 6,000 Hours {1355}
1998/12/07 Use 144-0235 Belt Tension Gauge to Check Belt Tension {1357}
1998/12/07 Use 145-9342 Filter Crusher To Reduce Waste And Collect Oil {5720,0800}
1998/12/07 New 146-4080 Digital Multimeter Available For Troubleshooting Electronic Circuits {0115}
1998/12/07 Use 149-5138 Mechanical Push/Puller For Extra Force In General Purpose Applications {0700}
1998/12/07 Use 150-1782 Crossblock For 8B-7548 Push Puller
1998/12/07 Use 153-8537 A/C Component To Flush Air Conditioning Systems And Recycle Solvent {0757}
1998/12/07 Improved Battery Cable Available {1402}
1998/12/07 Use 143-4062, 143-4065, 143-4066 Auto ID Pressure Sensors With DataView {1000,3000,4000,5000,6000,0788}
1998/12/07 Use 153-9630 PWM-Analog Test Group-Sensor Adapter Kit For DataView {1000,3000,4000,5000,6000,0788}
1998/12/14 Service Magazine Article published In Error {5083}
1998/12/14 Grease Fittings May Have Been Over Tightened On Automatic Lubrication Injectors {7540}
1998/12/14 New Model Specific VIMS Keypad Command Window Cling Films Now Available {7601}