Heavy Duty, High Intensity Flashlights 149-8322 Flashlight 149-8331 Flashlight 149-8333 Flashlight 149-8334 Flashlight 149-8335 Flashlight 149-8327 Helmet Light Holder {0701}
Usage:
All Models
Warranty: M
Features/Benefits
-
- * All flashlights made in the USA with a lifetime guarantee from the manufacturer.
- * Each light comes standard with a Xenon filled lamp (600 percent brighter than standard bulbs).
- * Manufactured for rugged use, cases are made from polycarbonate resin making them shockproof and unbreakable .
- * All fittings are made of stainless steel and will not corrode.
- * All of theses flashlights are FM, CSA, and MSHA approved.
- * All flashlights made in the USA with a lifetime guarantee from the manufacturer.
149-8331 Flashlight
-
- * Waterproof to 152 m (500 ft).
- * 2 AA batteries included.
- * Handy pocket clip.
- * Yellow with Caterpillar logo.
- * Waterproof to 152 m (500 ft).
149-8322 Flashlight
-
- * Waterproof to 61 m (200 ft).
- * Lanyard rope attached.
- * Yellow with Caterpillar logo.
- * Waterproof to 61 m (200 ft).
149-8333 Flashlight
-
- * Waterproof to 152 m (500 ft).
- * Lanyard rope attached.
- * Black with Caterpillar logo.
- * Waterproof to 152 m (500 ft).
149-8334 Flashlight
-
- * Waterproof to 152 m (500 ft).
- * Lanyard rope attached.
- * Dual filament for emergency back up.
- * Dual switch for emergency back up * Yellow with Caterpillar logo.
- * Waterproof to 152 m (500 ft).
149-8335 Flashlight
-
- * Water resistant, can be used in wet areas but is not submersible.
- * Head band, velcro, magnet, and clip included.
- * Black with Caterpillar logo.
- * Water resistant, can be used in wet areas but is not submersible.
149-8327 Helmet Light Holder
-
- * Used to attach flashlights to hard hats with or without light clip holes.
- * Light clip features a 360° rotatable mounting position.
- * Can also be used with all following flashlights; 141-1655 Flashlight, 149-8333 Flashlight, 149-8335 Flashlight, or 149-8331 Flashlight.
- * Used to attach flashlights to hard hats with or without light clip holes.
Specifications/Technical Information
149-8331 Flashlight
- Length - 130.0 mm (5.12 in)
- Diameter - 47.0 mm (1.85 in)
- Weight - 99 g (3.5 oz)
- Candlepower - 8000
- Bulb - 149-8338 Lamp Module 2304
- Lamp life - 20 hours
- Batteries required - 2, 1U-9533 Alkaline AA Battery
- Current - .60 amps, 3.0 volts, 1.8 watts
- Diameter - 47.0 mm (1.85 in)
149-8322 Flashlight
- Length - 190.5 mm (7.50 in)
- Diameter - 47.0 mm (1.85 in)
- Weight - 339.6 g (12 oz)
- Bulb - 149-8336 Lamp Module 2004
- Lamp life - 30 hours
- Batteries required - 3, 1U-9531 Alkaline C Battery
- Current - .76 amps, 4.5 volts, 3.42 watts
- Diameter - 47.0 mm (1.85 in)
149-8333 Flashlight
- Length - 165.1 mm (6.50 in)
- Diameter - 41.2 mm (1.62 in)
- Weight - 226.4 g (8 oz)
- Candlepower - 10,000
- Bulb - 149-8339 Lamp Module 2404
- Lamp life - 30 hours
- Batteries required - 4, 1U-9533 Alkaline AA Battery
- Current - .53 amps, 6.0 volts, 3.18 watts
- Diameter - 41.2 mm (1.62 in)
149-8334 Flashlight
- Length - 279.4 mm (11.00 in)
- Diameter - 63.5 mm (2.50 in)
- Weight - 495.3 g (17.5 oz)
- Bulb - 149-8340 Lamp Module 3502
- Lamp life - 60 hours
- Current - 1.0 amps, 6.0 volts, 6.0 watts
- Batteries required - 4, 1U-9531 Alkaline C Battery
- Diameter - 63.5 mm (2.50 in)
149-8335 Flashlight
- Length - 76.2 mm (3.00 in)
- Width - 44.5 mm (1.75 in)
- Weight - 84.9 g (3 oz)
- Bulb - 149-8337 Lamp Module 2304
- Lamp life - 20 hours
- Current - .60 amps, 3.0 volts, 1.8 watts
- Batteries required - 2, 1U-9533 Alkaline AA Battery
- Width - 44.5 mm (1.75 in)
Caterpillar Information System:
1998/08/17 Service Manual And Parts Manual Literature Available {0374,0375}
1998/08/17 Use 146-2597 Rocker Arm Bearing Installation Tool To Hold Push Rods In Place {1208}
1998/08/17 Use 136-3113 Timing Gauge To Time Engines With Bosch Pump {1251}
1998/08/17 Use 150-3992 And 150-3993 Timing Pins For Fuel Injection Pumps {1251,1251,1000}
1998/08/17 Use 125-0201 Guide Assembly For Camshaft Installation {1202}
1998/08/17 Correction To Operational Check And Zero Check For LSI (Type 2 System) {7455,7400,1706,1408}
1998/08/17 Service Code May Be Logged If Implement Levers Are Moved Prior To Start Up {5737,6116,7490}
1998/08/17 Improved Pilot Valve Group Now Available {4805}
1998/08/17 Use 123-4588 Plate Gauge To Measure Shim Pack Thickness {4314}
1998/08/17 Remanufactured Wheel Stations And Wheel Station Components For Off-Highway Trucks {3001,4051}
1998/08/17 Use 150-2505 Maintenance Tool Group For Pipelayer Maintenance {0600}
1998/08/17 New Integral Seal Replaces Gasket In Engine Water Lines Groups {1380}
1998/08/17 Use 148-9610 Personal Computer Cart To Hold PC, Monitor, Printer, And Data View Hardware {7600}
1998/08/24 New Custom Product Support Literature Is Available For 785B Off-Highway Trucks Equipped With 4Z-6509 Wiggins Service Center (Factory Installed) {0374,7513}
1998/08/24 Wheel Bearing Adjustment Procedure For 789 Cast Wheel And High Capacity Bearings {4051,4066,4208}
1998/08/24 Supplement To Correct Front Drive Shaft Group Torque {3250}
1998/08/24 Improved 159-1610 And 159-1612 Electronic Transmission Control Groups Now Available For Wheel Loaders {3168}
1998/08/24 New Implement Control Groups Available With Numerous Enhancements {5701,5706}
1998/08/24 New Transmission Control Group And Flash Software Available, Featuring Improved Downshifting {3168}
1998/08/24 Update Is Available For The RM/SM350 Rotor Drive Chain Idler Wheels {5634}
1998/08/24 Proper Mounting Of Electrical Arc Suppressors {1408,4466}
1998/08/31 New Sun Screen Improves Operator Comfort {7340,7300}
1998/08/31 New Larger Engine Scavenge Oil Pump Provides More Oil Flow {1312}
1998/08/31 Procedure On Removal Of Cradle Mounting Pin {3278,3268,7200}