Usage:
1. Remove cover (1) from the air cleaner body (2).
2. Remove element (3).
3. Disconnect vent tube (5) from air cleaner body (2).
4. Remove mounting bands (4).
5. Remove air cleaner body (2) and coupling.
Install Air Cleaner (3306)
1. Put a thin layer of clean engine oil on the O-ring seals and the bores of body (2) and turbocharger inlet.
2. Fully install coupling (1) in the inlet bore of the turbocharger.
3. Put air cleaner body (2) into position over coupling (1).
4. Install the mounting bands loosely.
5. Adjust air cleaner body (2) to give a clearance of .250 ± .062 in. (6.35 ± 1.57 mm) between the inside lip of the air cleaner body (2) and the face of the coupling (1). Tighten the mounting bands.
6. Connect vent tube (3).
7. Install element (5) and cover (4).