Introduction
Usage:
The specifications given in this book are on the basis of information available at the time the book was written. These specifications give the torques, operating pressure, measurements of new parts, adjustments and other items that will affect the service of the product.
When the words "use again" are in the description, the specification given can be used to determine if a part can be used again. If the part is equal to or within the specification given, use the part again. When the word "permissible" is in the description, the specification given is the "maximum or minimum" tolerance permitted before adjustment, repair and/or new parts are needed.
A comparison can be made between the measurements of a worn part, and the specifications of a new part to find the amount of wear. A part that is worn can be safe to use if an estimate of the remainder of its service life is good. If a short service life is expected, replace the part.
Caterpillar Information System:
3208 TRUCK ENGINE Crankcase Breather
3208 TRUCK ENGINE Air Inlet Manifold
3208 TRUCK ENGINE Actuator
3208 TRUCK ENGINE Remove Actuator And EGR Valve
3208 TRUCK ENGINE EGR Switch Assembly
3208 TRUCK ENGINE Fuel Setting
3208 TRUCK ENGINE Automatic Timing Advance Unit 3° For EGR Engine
3208 TRUCK ENGINE EGR Actuator And EGR Valve
3208 TRUCK ENGINE EGR Valve
3208 TRUCK ENGINE EGR Actuator
3208 TRUCK ENGINE EGR Tube
3208 TRUCK ENGINE Breather
D353 INDUSTRIAL & MARINE ENGINES Fuel Injection Equipment
D353 INDUSTRIAL & MARINE ENGINES Fuel Transfer Pump
D353 INDUSTRIAL & MARINE ENGINES Fuel Pump And Governor Drive
D353 INDUSTRIAL & MARINE ENGINES Fuel Filter
D353 INDUSTRIAL & MARINE ENGINES Camshaft And Timing Gears
D353 INDUSTRIAL & MARINE ENGINES Accessory Drive Group
D353 INDUSTRIAL & MARINE ENGINES Gear Group (Camshaft Idler and Power Take-Off Idler)
D353 INDUSTRIAL & MARINE ENGINES Governor (Earlier)
D353 INDUSTRIAL & MARINE ENGINES Service Meter
D353 INDUSTRIAL & MARINE ENGINES Governor (Later)
D353 INDUSTRIAL & MARINE ENGINES Primary Fuel Filter
D353 INDUSTRIAL & MARINE ENGINES Hydraulic Air-Fuel Ratio Control