PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE WATER TUBE ASSEMBLY ON CERTAIN 3500B MARINE ENGINES
Usage:
SEBE9044
January 24, 2005
U-27
D-22
O-25
TM-3
Show/hide table
| Priority |
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE WATER TUBE ASSEMBLY ON CERTAIN 3500B MARINE ENGINES |
|
| 1380 |
PI30761
|
|
NOTE: The information supplied in this service letter may not be valid after the termination date of this program. Do not perform the work outlined in this Service Letter after the termination date without first contacting your Caterpillar product analyst.
Show/hide table
COMPLETION DATE |
TERMINATION DATE |
| July 31, 2005 | January 31, 2006 |
PROBLEM
Certain 3500B marine engines have a SCAC water tube that does not fit properly.AFFECTED PRODUCT
Show/hide table
| Model | Identification Number |
| 3512B |
|
| 3516B |
|
PARTS NEEDED
Show/hide table
Qty |
Part Number | Description |
| 1 | 9Y6893 | GASKET |
| 1 | 2536233 | TUBE AS |
ACTION REQUIRED
Replace existing 149-2201 Tube Assembly with a new 253-6233 Tube Assembly.OWNER NOTIFICATION
U.S. and Canadian owners will receive the attached Owner Notification.SERVICE CLAIM ALLOWANCES
Show/hide table
|
|
|
|
|||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
NOTE: U.S. and Canadian Dealers Only - Eligible dealers may enter a Type 2 SIMS Report |
|||||
PARTS DISPOSITION
Handle the parts in accordance with your Warranty Bulletin on warranty parts handling.MAKE EVERY EFFORT TO COMPLETE THIS PROGRAM AS SOON AS POSSIBLE.
Attach. (1-Owner Notification)
COPY OF OWNER NOTIFICATION FOR U.S. AND CANADIAN OWNERS
XYZ Corporation3240 Arrow Drive
Anywhere, YZ 99999
PRIORITY - PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE WATER TUBE ASSEMBLY
MODELS INVOLVED ? 3512B, 3516B MARINE ENGINES
Dear Caterpillar Product Owner:
A new water tube assembly needs to be installed on the products listed below. You will not be charged for the service performed.
Contact your local Caterpillar dealer immediately to schedule this service. The dealer will advise you of the time required to complete this service. Please refer the dealer to their Service Letter dated January 24, 2005 when scheduling this service.
We regret the inconvenience this may cause you, but urge you to have this service performed as soon as possible to prevent unscheduled downtime.
Caterpillar Inc.
Identification #(s)
Attached to January 24, 2005 Service Letter
Caterpillar Information System:
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING FUEL LINE ON CERTAIN C9 MARINE ENGINES PRODUCT IMPROVEMENT PROGRAM FOR REPLACING FUEL LINE ON CERTAIN C9 MARINE ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING CYLINDER HEADS ON CERTAIN G3406 ENGINES PRODUCT SUPPORT PROGRAM FOR REPLACING CYLINDER HEADS ON CERTAIN G3406 ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE ALTERNATOR BRACKET ON CERTAIN C12 MARINE ENGINES PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE ALTERNATOR BRACKET ON CERTAIN C12 MARINE ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING TURBOCHARGER HOUSINGS ON CERTAIN 3500 SERIES ENGINES. PRODUCT IMPROVEMENT PROGRAM FOR REPLACING TURBOCHARGER HOUSINGS ON CERTAIN 3500 SERIES ENGINES.
PRODUCT SUPPORT PROGRAM FOR REFLASHING ENGINE SOFTWARE TO ELIMINATE A TIMING KNOCK ON CERTAIN C15 TRUCK ENGINES PRODUCT SUPPORT PROGRAM FOR REFLASHING ENGINE SOFTWARE TO ELIMINATE A TIMING KNOCK ON CERTAIN C15 TRUCK ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR INSTALLATION OF A CHECK VALVE KIT ON CERTAIN 3126E ENGINES PRODUCT IMPROVEMENT PROGRAM FOR INSTALLATION OF A CHECK VALVE KIT ON CERTAIN 3126E ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE ENGINE ACCESSORY DRIVE TENSIONER ON CERTAIN C15 TRUCK ENGINES PRODUCT SUPPORT PROGRAM FOR REPLACING THE ENGINE ACCESSORY DRIVE TENSIONER ON CERTAIN C15 TRUCK ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR SAMPLING THE ENGINE OIL AND IF NECESSARY REPLACING THE IDLER GEAR ASSEMBLY ON 3054C ENGINES INSTALLED IN CERTAIN ASV RC85 AND RC100 MACHINES PRODUCT IMPROVEMENT PROGRAM FOR SAMPLING THE ENGINE OIL AND IF NECESSARY REPLACING THE IDLER GEAR ASSEMBLY ON 3054C ENGINES INSTALLED IN CERTAIN ASV RC85 AND RC100 MACHINES
PRODUCT SUPPORT PROGRAM FOR INSTALLING VIBRATION ISOLATORS FOR POWER DISTIBUTION PANELS ON CERTAIN 3500B SERIES II MARINE ENGINES PRODUCT SUPPORT PROGRAM FOR INSTALLING VIBRATION ISOLATORS FOR POWER DISTIBUTION PANELS ON CERTAIN 3500B SERIES II MARINE ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE FUEL PRESSURE SENSOR ON CERTAIN C7 MARINE ENGINES PRODUCT SUPPORT PROGRAM FOR REPLACING THE FUEL PRESSURE SENSOR ON CERTAIN C7 MARINE ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE HIGH PRESSURE OIL PUMP AND / OR REFLASHING SOFTWARE ON CERTAIN C9 ENGINES IN RV APPLICATIONS PRODUCT SUPPORT PROGRAM FOR REPLACING THE HIGH PRESSURE OIL PUMP AND / OR REFLASHING SOFTWARE ON CERTAIN C9 ENGINES IN RV APPLICATIONS
PRODUCT SUPPORT PROGRAM FOR INSTALLING NEW FLASH FILES FOR CERTAIN C15 TRUCK ENGINES PRODUCT SUPPORT PROGRAM FOR INSTALLING NEW FLASH FILES FOR CERTAIN C15 TRUCK ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE TOP PISTON RING ON CERTAIN 3126 ENGINES PRODUCT SUPPORT PROGRAM FOR REPLACING THE TOP PISTON RING ON CERTAIN 3126 ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE CONNECTING ROD BEARINGS ON CERTAIN G3612 AND G3616 ENGINES PRODUCT SUPPORT PROGRAM FOR REPLACING THE CONNECTING ROD BEARINGS ON CERTAIN G3612 AND G3616 ENGINES
PRODUCT SUPPORT PROGRAM FOR INSPECTING AND REPAIRING ADAPTORS ON CERTAIN 3516 AND 3516B ENGINES PRODUCT SUPPORT PROGRAM FOR INSPECTING AND REPAIRING ADAPTORS ON CERTAIN 3516 AND 3516B ENGINES
PRODUCT SUPPORT PROGRAM FOR INSPECTING AND REPAIRING ADAPTORS ON CERTAIN 3516 AND 3516B ENGINES PRODUCT SUPPORT PROGRAM FOR INSPECTING AND REPAIRING ADAPTORS ON CERTAIN 3516 AND 3516B ENGINES
PRODUCT SUPPORT PROGRAM FOR INSTALLATION OF A CHECK VALVE KIT ON CERTAIN C9 MACHINE AND INDUSTRIAL ENGINES PRODUCT SUPPORT PROGRAM FOR INSTALLATION OF A CHECK VALVE KIT ON CERTAIN C9 MACHINE AND INDUSTRIAL ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE VALVE COVER ON CERTAIN HIGH HORSEPOWER C15 TRUCK ENGINES PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE VALVE COVER ON CERTAIN HIGH HORSEPOWER C15 TRUCK ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR SAMPLING THE ENGINE OIL AND IF NECESSARY REPLACING THE IDLER GEAR ASSEMBLY ON 3054C, 3054E, AND 3056E ENGINES INDUSTRIAL ENGINES PRODUCT IMPROVEMENT PROGRAM FOR SAMPLING THE ENGINE OIL AND IF NECESSARY REPLACING THE IDLER GEAR ASSEMBLY ON 3054C, 3054E, AND 3056E ENGINES INDUSTRIAL ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING 249-6480 PRODUCT LINK KITS FROM DEALER PARTS STOCK PRODUCT IMPROVEMENT PROGRAM FOR REMOVING 249-6480 PRODUCT LINK KITS FROM DEALER PARTS STOCK
PRODUCT SUPPORT PROGRAM FOR INSTALLING INJECTOR SLEEVE KITS IN CERTAIN C11 AND C13 TRUCK ENGINES PRODUCT SUPPORT PROGRAM FOR INSTALLING INJECTOR SLEEVE KITS IN CERTAIN C11 AND C13 TRUCK ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE ENGINE OIL GAGE ON CERTAIN C13 TRUCK ENGINES PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE ENGINE OIL GAGE ON CERTAIN C13 TRUCK ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING 10R2008 CYLINDER HEAD ASSEMBLIES FROM PARTS STOCK PRODUCT IMPROVEMENT PROGRAM FOR REMOVING 10R2008 CYLINDER HEAD ASSEMBLIES FROM PARTS STOCK
PRODUCT SUPPORT PROGRAM FOR MOVING THE HEATER RETURN LINE ON CERTAIN C9 TRUCK ENGINES PRODUCT SUPPORT PROGRAM FOR MOVING THE HEATER RETURN LINE ON CERTAIN C9 TRUCK ENGINES