R1700G L.H.D. BRAKING SYSTEM Caterpillar


Brake Control Valve (Service)

Usage:

SMCS Code: 4265

Brake pressure setting ... 4310 ± 345 kPa (625 ± 50 psi)

NOTE: The output pressure of the rear brake port will be approximately 345 kPa (50 psi) higher than the output pressure of the front brake port.

(1) Torque for the two bolts ... 30 ± 5 N·m (22 ± 4 lb ft)

(2) Two bolts (not shown) which fasten the two piece valve together. Apply 155-0695 Thread Lock Compound to the bolt threads prior to assembly. Tighten the bolts to a torque of ... 33 ± 2 N·m (24 ± 2 lb ft)

Caterpillar Information System:

Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.