1989/07/01 Caterpillar


New Seal Used In Auxiliary Fresh Water Pump Groups

Usage:


3500 Family Of Engines

Reference: Engine News, December 1988, Page 1, "New oil Seal For Water Pumps Has Hydrodynamic Grooves."

Description of Change: A new seal is used in the auxiliary fresh water pump groups used on the 3500 Family of Engines. The new seal has hydrodynamic grooves and is similar to the crankshaft seal. The new seal will help prevent oil from leaking around the pump shaft.


Location of the new 9X4594 Seal.

Adaptable To: The new 9X4594 Seal is a direct replacement for the former 9H8839, 8C5236, or 2P6286 Seals in the 5N5978 and 9Y8176 Auxiliary Fresh Water Pump Groups used on the 3500 Family of Engines.

Caterpillar Information System:

1989/07/01 New Connector With An Orifice Added To Fuel Injection Lines Groups To Help Prevent Cavitation
1989/07/01 New Viton Rubber Seals Used
1989/06/01 List of Service Publications
1989/06/01 Identification Of Asbestos-Free Material
1989/06/01 "CXP Fluids" Are Now "Cat Fluids"
1989/06/01 Vibration Measurement System For Caterpillar Products
1989/06/01 New Upper and Lower Seals For Folded Core Radiators In Cold Temperature Applications
1989/06/01 New Front Crankshaft Seal Requires New Installer Tool
1989/06/01 New Extension Assembly Used In Gas Engine Ignition Groups
1989/06/01 Maintenance Inspection Of Emergency Shutdown Systems Required Every 1000 Hours
1989/05/01 Procedure For Replacing Batteries Or Battery Cables
1989/05/01 New Head Gasket Used
1989/07/01 Damper Groups Improved To Help Prevent Leaks Of Viscous Fluids
1989/07/01 New, Larger Vibration Damper Improves Wear Life
1989/07/01 Special Instruction, "Battery Charging Rate And Time Tables," Available On Oil Resistant Paper
1989/08/01 Shock Mounts Give Longer Life To 9F3099 Switch Assembly (Starter Relay)
1989/08/01 Improvements To Attachment Altronic® Ignition Systems
1989/08/01 Improved Head Gasket Used; Summary Of Earlier Gaskets And Service Tips
1989/08/01 New Oil Change Recommendations For Severe Applications
1989/08/01 New Watercooled Exhaust Manifolds
1989/08/01 Stronger Spacer Plate Prevents Cracking
1989/08/01 Improved Control Rod Assembly Used In Fuel Injection Control Groups
1989/08/01 Lube System Screen Assembly Available For Use During Dynamometer Testing
1989/08/01 Engine Oil Coolers With New Rubber End Sheet Available For Parts Service
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.