A New Fuel Priming Pump Switch and Guard are Now Used on Certain 3512C Engines {1261}
- Engine
- 3512C (S/N: MLM1-341)
Description Of Change: The new fuel priming pump switch is more resistant to vibration.
Adaptable To:
Show/hide table
Do not operate or work on this product unless you have read and understood the instruction and warnings in the relevant Operation and Maintenance Manuals and relevant service literature. Failure to follow the instructions or heed the warnings could result in injury or death. Proper care is your responsibility. |
The new 301-2980 Toggle Switch and 249-5492 Switch Guard replace the former 146-0240 Toggle Switch Gp.
Show/hide table
Illustration 1 | g06422007 |
Caterpillar Information System:
New Engine Software and Aftertreatment Software are Now Used for 797F Tier 4 Off-Highway Trucks {1920, 7620} New Engine Software and Aftertreatment Software are Now Used for 797F Tier 4 Off-Highway Trucks {1920, 7620}
Transmission Planet Gear Failure May Occur on Certain 797, 797B, and 797F Off-Highway Trucks {3030, 3160} Transmission Planet Gear Failure May Occur on Certain 797, 797B, and 797F Off-Highway Trucks {3030, 3160}
High-Pressure Fuel Pump Adapter and Front Gear Inspection for Certain C175–16 and C175–20 Engines {1242, 125H} High-Pressure Fuel Pump Adapter and Front Gear Inspection for Certain C175–16 and C175–20 Engines {1242, 125H}
Procedure to Replace Drive Assembly of Starter Motor On All Cat® Products {1453} Procedure to Replace Drive Assembly of Starter Motor On All Cat® Products {1453}
Magnetic Switch Assembly for the Operator Arrangement May Become an Open Circuit on Certain Mini Hydraulic Excavators {1408} Magnetic Switch Assembly for the Operator Arrangement May Become an Open Circuit on Certain Mini Hydraulic Excavators {1408}
G3500 Generator Sets Maintenance Interval Schedule
Inspection of the Rear of the Engine on Certain C4.4 Machine Engines {1201} Inspection of the Rear of the Engine on Certain C4.4 Machine Engines {1201}
G3500 Generator Sets Generator Start-up Checklist
G3500 Generator Sets Refill Capacities
G3500 Generator Sets Before Starting Engine
Certain Excavators Have Been Equipped With Serial Number Plate With Mistyped Information {7405, 7557, 7563} Certain Excavators Have Been Equipped With Serial Number Plate With Mistyped Information {7405, 7557, 7563}
G3500 Generator Sets Starting Motor - Inspect
Improved Head to Block Joint on Certain C175 Reman Engines {1000} Improved Head to Block Joint on Certain C175 Reman Engines {1000}
PM620, PM622, PM820 and PM822 and PM825 Cold Planer Machine Systems Mixing Chamber
Procedure for Improving Battery Life is Now Available on Certain Generator Sets {1401} Procedure for Improving Battery Life is Now Available on Certain Generator Sets {1401}
Planet Shaft Assemblies May Be Improperly Manufactured on Certain 797, 797B, and 797F Off-Highway Trucks {3030, 3160} Planet Shaft Assemblies May Be Improperly Manufactured on Certain 797, 797B, and 797F Off-Highway Trucks {3030, 3160}
PM620, PM622, PM820 and PM822 and PM825 Cold Planer Machine Systems Rotor - Plate Group
PM620, PM622, PM820 and PM822 and PM825 Cold Planer Machine Systems Hydraulic Cylinder
PM620, PM622, PM820 and PM822 and PM825 Cold Planer Machine Systems Electronic Control Module
Procedure to Maintain Secure Start on Any Mobile Device is Now Available for Certain Excavators {7610, 7620} Procedure to Maintain Secure Start on Any Mobile Device is Now Available for Certain Excavators {7610, 7620}
PM620, PM622, PM820 and PM822 and PM825 Cold Planer Machine Systems Rotor Drive Group
Fuel Transfer Pump Group May Not Shut Off Automatically on Certain 320 to 330 Excavators {7610, 7620} Fuel Transfer Pump Group May Not Shut Off Automatically on Certain 320 to 330 Excavators {7610, 7620}
Unable to Perform the Bucket Zero Calibration on Certain 320, 323, 330, and 336 Excavators {7610, 7620} Unable to Perform the Bucket Zero Calibration on Certain 320, 323, 330, and 336 Excavators {7610, 7620}
A New Generator Body Stiffening Plate is Now Available for Certain 3512B Generator Sets {7002} A New Generator Body Stiffening Plate is Now Available for Certain 3512B Generator Sets {7002}