C175-16 Engine for Off-Highway Trucks Caterpillar


Engine Oil Scavenge Pump

Usage:

794 AC HRT


Illustration 1g06362645

Table 1
Item  Qty  Part  Specification Description 
3P-0656 O-Ring Seal  Before assembly, lubricate the bore lightly with the fluid that is being sealed. 
160-8750 Bolt  Use the following procedure to tighten the bolts:
1. Hand tighten all the bolts prior to applying torque.
2. Tighten bolt (3) on the right side of the engine.
3. Tighten bolt (4) on the left side of the engine.
4. Tighten the bolts (2).
5. Loosen and re-tighten all the bolts at same time. 
275-2200 Bolt 
275-2200 Bolt 

Caterpillar Information System:

New Monitor Software Is Now Available for Certain Track-Type Tractors and Various Products {7490, 7601, 7603, 7610, 7620} New Monitor Software Is Now Available for Certain Track-Type Tractors and Various Products {7490, 7601, 7603, 7610, 7620}
C175-16 Engine for Off-Highway Trucks Lifter Group
C175-16 Engine for Off-Highway Trucks Turbocharger
C175-16 Engine for Off-Highway Trucks Engine Oil Pan
C175-16 Engine for Off-Highway Trucks Engine Centrifugal Oil Filter
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavator Machine System Main Control Valve
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavator Machine System Cylinder Drift - Check
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavator CAN Data Link - Test
C9.3B Industrial Engines Water Pump - Install
140 Motor Grader Systems Electronic Control (Brake System)
C9.3B Industrial Engines Water Pump - Remove
C175-16 Engine for Off-Highway Trucks Electric Starting Motor
C175-16 Oil and Gas Generator Set Before Starting Engine
C175-16 Engine for Off-Highway Trucks Fuel Filter (Primary)
C175-16 Engine for Off-Highway Trucks Fuel Injection Pump
C175-16 Oil and Gas Generator Set Alarms and Shutoffs
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavator System Schematic
Bench Test Procedure For Hydraulic Piston Pumps {5070} Bench Test Procedure For Hydraulic Piston Pumps {5070}
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavator Connector Contact Description
C175-16 Oil and Gas Generator Set Safety Messages
PM620, PM622, PM820 and PM822 and PM825 Cold Planer Machine Systems Water Spray Group - Lines
PM620, PM622, PM820 and PM822 and PM825 Cold Planer Machine Systems Water Spray Group - Lines
Exhaust Gas Valve (NRS) on Certain C7.1 and C6.6 Engines {1082} Exhaust Gas Valve (NRS) on Certain C7.1 and C6.6 Engines {1082}
140 Motor Grader Systems Oil Cooler (Brake)
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.