C175-16 Engine for Off-Highway Trucks Caterpillar


Turbocharger

Usage:

794 AC HRT


Illustration 1g06362603

Table 1
Item  Qty  Part  Specification Description 
10  8T-4191 Bolt  Before assembly, lubricate the threads.
Torque to 39.6 ± 2.8 N·m (29.2 ± 2.1 lb ft)
283-4294 Clamp As  Use the following procedure to tighten the clamp assembly:
1. Before assembly, lubricate the threads.
2. Tighten the clamp nut to 20 N·m (177 lb in).
3. Tap lightly all around.
4. Re-tighten the clamp nut to 30 ± 2 N·m (266 ± 18 lb in).
5. Again tap lightly all around.
6. Repeat re-tighten to 30 ± 2 N·m (266 ± 18 lb in)


Illustration 2g06362604

Table 2
Item  Qty  Part  Specification Description 
326-6485 Bolt  Before assembly, apply Loctite 242 threadlocker med strength to the threads.
Torque to 45.5 ± 2.5 N·m (33.6 ± 1.8 lb ft)
Use the following procedure to tighten:
1. Before assembly, apply oil lightly to the threads.
2. Loosen and tighten in a way that do not impose any bending loads.
3. Tighten the compressor wheel to 87.5 ± 5.5 N·m (64.5 ± 4.1 lb ft)
203-9203 Screw  Torque to 6.75 ± 0.55 N·m (59.74 ± 4.87 lb in)
332-8945 Plug  Torque to 15.5 ± 1.5 N·m (137.2 ± 13.3 lb in)
481-8103 Pin  Torque to 45.5 ± 2.5 N·m (33.6 ± 1.8 lb ft)

Caterpillar Information System:

C175-16 Engine for Off-Highway Trucks Engine Oil Pan
C175-16 Engine for Off-Highway Trucks Engine Centrifugal Oil Filter
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavator Machine System Main Control Valve
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavator Machine System Cylinder Drift - Check
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavator CAN Data Link - Test
C9.3B Industrial Engines Water Pump - Install
140 Motor Grader Systems Electronic Control (Brake System)
C9.3B Industrial Engines Water Pump - Remove
C175-16 Engine for Off-Highway Trucks Electric Starting Motor
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavator Machine System Pump Control (Main Hydraulic)
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavator Switch Circuits - Test
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavator Solenoid Valve - Test
C175-16 Engine for Off-Highway Trucks Lifter Group
New Monitor Software Is Now Available for Certain Track-Type Tractors and Various Products {7490, 7601, 7603, 7610, 7620} New Monitor Software Is Now Available for Certain Track-Type Tractors and Various Products {7490, 7601, 7603, 7610, 7620}
C175-16 Engine for Off-Highway Trucks Engine Oil Scavenge Pump
C175-16 Oil and Gas Generator Set Before Starting Engine
C175-16 Engine for Off-Highway Trucks Fuel Filter (Primary)
C175-16 Engine for Off-Highway Trucks Fuel Injection Pump
C175-16 Oil and Gas Generator Set Alarms and Shutoffs
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavator System Schematic
Bench Test Procedure For Hydraulic Piston Pumps {5070} Bench Test Procedure For Hydraulic Piston Pumps {5070}
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavator Connector Contact Description
C175-16 Oil and Gas Generator Set Safety Messages
PM620, PM622, PM820 and PM822 and PM825 Cold Planer Machine Systems Water Spray Group - Lines
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.