New Jacket Water Bypass Tube is Now Used on Certain C175-20 Locomotive Engines {1380}
- Engine
- C175-20 (S/N: R4F1-134)
Description Of Change: New jacket water bypass tube is now used on certain C175-20 Locomotive Engines. The new jacket water bypass tube has been improved to prevent water bypass line leakages, by using the new cast elbow that is rotated down towards the pump to eliminate a bend and shorten the tube.
Adaptable To: The new jacket water bypass tube is adaptable to the products within the listed serial numbers, and are effective with all products after the listed serial numbers.
Show/hide table
Illustration 1 | g06253183 |
Former water jacket bypass tube with added clamp (A) (B) (C) (D) |
Show/hide table
Illustration 2 | g06253187 |
New rotated elbow and water jacket bypass tube with added clamp (1) (2) (3) (4) |
The new part numbers are listed in Table 1.
Show/hide table
Item | Qty | New Part Number | Part Name | Former Part Number(1) |
1 | 1 | Elbow | ||
3 | 1 | Tube As |
Show/hide table
(1) | The former part number listed is for reference only and may differ. |
Caterpillar Information System:
New Improved Gearbox Oil Heater is Now Used on Certain G3512E, G3516H, G3520C, and G3520H Generator Sets {1333} New Improved Gearbox Oil Heater is Now Used on Certain G3512E, G3516H, G3520C, and G3520H Generator Sets {1333}
A New Service Replacement Control Board (APC1+) is Now Used on Certain Cat® Uninterrupted Power Supply {1418, 4480} A New Service Replacement Control Board (APC1+) is Now Used on Certain Cat® Uninterrupted Power Supply {1418, 4480}
794 AC Off-Highway Truck Magnetic Plug (Wheels) - Check
C32 Marine Engines Electronic Control Module - Remove and Install
336, 336 GC and 340 Excavator Systems Pilot System
C7.1 Engines Coolant Pressure Is Low
C7.1 Marine Engine Exhaust Elbow - Remove and Install
The Buffer Seal Groove May Wear on the Steering Cylinder Head on Certain 773G and 777G Off-Highway Trucks {4303} The Buffer Seal Groove May Wear on the Steering Cylinder Head on Certain 773G and 777G Off-Highway Trucks {4303}
336, 336 GC and 340 Excavator Systems Stick Cylinder
320GC and 320 Excavator Engine Supplement Nitrogen Oxide Sensor - Remove and Install
C32 Marine Engines Inlet Air Temperature Sensor - Remove and Install
C32 Marine Engines Inlet Manifold Pressure Sensor - Remove and Install
C32 Tier 4 Final Marine Commercial Engines DEF Pump Motor - Test
A New Plate-Type Heat Exchanger is Now Available for Certain Cat® 3516C Marine Engines {1379} A New Plate-Type Heat Exchanger is Now Available for Certain Cat® 3516C Marine Engines {1379}
A New Heat Shrink is Now Used for Certain Cat Electronic Control Module (ECM) Resistors {0644, 1901} A New Heat Shrink is Now Used for Certain Cat Electronic Control Module (ECM) Resistors {0644, 1901}
320GC, 320 and 323 Excavators Machine Systems Swivel - Remove and Install
794 AC Off-Highway Truck Electric Drive Pump (Powered Stairway) Oil - Change - If Equipped
794 AC Off-Highway Truck Electric Drive Pump (Powered Stairway) Oil Level - Check - If Equipped
336, 336 GC and 340 Excavator Systems Swing Motor
327-8644 Gauge Replacement {0374, 0701, 0763, 1214, 1215} 327-8644 Gauge Replacement {0374, 0701, 0763, 1214, 1215}
A New Integral Seal is Now Available for Certain 3524B Engines {1151, 1157, 1162, 1166, 1206, 3279, 7555} A New Integral Seal is Now Available for Certain 3524B Engines {1151, 1157, 1162, 1166, 1206, 3279, 7555}
PM820, PM822, and PM825 Cold Planer Machine Systems Hydraulic Cylinder (Rear Door) - Remove and Install
320GC Excavator Engine Supplement Hood - Remove and Install
320GC and 320 Excavator Engine Supplement Soot Antenna - Remove and Install