C175 Oil&Gas Offshore Engine Caterpillar


NOx Sensor Supply - Test

Usage:

C175-16 P6N
Use this procedure to troubleshoot a problem with the NOx sensor supply. Also, use this procedure if one of the following diagnostic codes is active or easily repeated.

Table 1
J1939 Code and Description  CDL Code and Description  Comments 
3216-6
Aftertreatment #1 Intake NOx : Current Above Normal 
3002-6
Engine Exhaust NOx Level Sensor : Current Above Normal 
A short circuit has been detected in the circuit for the NOx sensor power supply 
3226-6
Aftertreatment #1 Outlet NOx : Current Above Normal 
3609-6
Aftertreatment #1 Outlet #1 NOx Level Sensor : Current Above Normal 
A short circuit has been detected in the circuit for the NOx sensor power supply 


Illustration 1g06325932

Table 2
Troubleshooting Test Steps  Value  Results 

1. Check for Codes

A. Turn the DC breaker to ON.

B. Connect Cat® Electronic Technician (ET) to the service tool connector.

C. Determine if a code is active or logged.

 

Codes
 

Result: A -6 code for a NOx sensor is active or logged.

A short circuit in the wiring harness between the Electronic Control Module (ECM) and the NOx sensor power supply has been detected.

Repair: Repair or replace the wiring harness.

Verify that the repair eliminated the problem.
 

If the procedure did not correct the issue, contact your Cat dealer Technical Communicator (TC). For further assistance, your TC can confer with the Dealer Solutions Network (DSN).

Caterpillar Information System:

C175 Oil&Gas Offshore Engine NOx Sensor - Test
C175 Oil&Gas Offshore Engine DEF Tank Sensor - Test
C175 Oil&Gas Offshore Engine DEF Pump Power Supply - Test
C175 Oil&Gas Offshore Engine DEF Pump Motor - Test
Improved Wiring Harnesses Are Now Used on Certain Truck Engines {1120, 1290, 1408, 1900} Improved Wiring Harnesses Are Now Used on Certain Truck Engines {1120, 1290, 1408, 1900}
C175 Oil&Gas Offshore Engine Aftertreatment Identification Module - Test
C175 Oil&Gas Offshore Engine SCR Catalyst Inlet Pressure Is Low
C175 Oil&Gas Offshore Engine SCR Catalyst Inlet Pressure Is High
C175 Oil&Gas Offshore Engine NOx Conversion Is Low
C175 Oil&Gas Offshore Engine DEF Tank Temperature Is Low
C175 Oil&Gas Offshore Engine DEF Tank Temperature Is High
C175 Oil&Gas Offshore Engine DEF Tank Level Is Low
C175 Oil&Gas Offshore Engine SCR Catalyst Temperature Sensor - Test
Photovoltaic Inverters Commissioning Startup
C175 Oil&Gas Offshore Engine Diagnostic Trouble Codes
3500E Marine Engines Overhaul (Top End)
PM820, PM822, and PM825 Cold Planer Rotor Drive Clutch - Inspect
Procedure to Install the Audio Visual Alarm on Off-Highway Trucks Equipped with Back Up Alarm {1408, 7400, 7402, 7407} Procedure to Install the Audio Visual Alarm on Off-Highway Trucks Equipped with Back Up Alarm {1408, 7400, 7402, 7407}
3500 and 3500B High Displacement Engines for Caterpillar Built Machines Water Pump - Assemble
3500 and 3500B High Displacement Engines for Caterpillar Built Machines Water Pump - Disassemble
323F SA Excavator and 323F MHPU Machine Systems Electronic Control (Machine System)
G3512 Generator Set Engine Accessory Drive (Front) - Disassemble
323F SA Excavator and 323F MHPU Machine Systems Electronic Control (Boom System)
323F SA Excavator and 323F MHPU Machine Systems Engine Control
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.