Maintenance Recommendations
Some factors that are important for determining the overhaul intervals include the following considerations:
- Performance of preventive maintenance.
- Performing maintenance according to the scheduled time.
- Use of recommended Diesel Exhaust Fluid (DEF).
- Proper installation.
- Operating conditions
- Operation within acceptable limits.
- Cleanliness of components.
Perform an inspection on the following components:
- Inspect harness for damaged wiring.
- Inspect for secure connections at all ends of the harness.
- Inspect harness for damaged wiring.
- Inspect for secure connections at all ends of the harness.
- Inspect harness for damaged wiring.
- Inspect for secure connections at all ends of the harness.
- Turn off power supply before unplugging or plugging in the 23-pin harness.
Caterpillar Information System:
C9.3 Marine Generator Set Engines Engine Oil Pressure - Test
2015/05/01 Improved Engine Harness Assemblies Are Used on Certain C18 Marine Engines {1408}
PM820, PM822, and PM825 Cold Planer Track Drive Planetary Oil - Change
C9.3 Marine Generator Set Engines Aftercooler - Test
2015/04/17 A New Air Compressor Kit Is Available for Certain C-12 Truck Engines {1803}
2015/08/28 New Software is Used on Certain 3516C and C175-16 Engines {108I, 108J, 108K, 1920}
C9.3 Marine Generator Set Engines Turbocharger - Inspect
C9.3 Marine Engine Fuel Filter Base - Remove and Install - Left-Hand Simplex
PM620 and PM622 Cold Planer Hydraulic Tank Breather - Replace
PM620 and PM622 Cold Planer Hydraulic System Return Filter - Replace
C9.3 Marine Generator Set Engines Air Inlet and Exhaust System - Inspect
349F and 352F Excavators Demolition
C9.3 Marine Engine Fuel Lines - Remove and Install - Right-Hand Simplex
Failures of the 5N-5692 Charging Alternator Gp on Certain 3500 Electric Power Generation (EPG) Engines{1405} Failures of the 5N-5692 Charging Alternator Gp on Certain 3500 Electric Power Generation (EPG) Engines{1405}
PM820, PM822, and PM825 Cold Planer Additional Messages
C9.3 Marine Generator Set Engines Pinion Clearance - Adjust
C9.3 Marine Engine Fuel Lines - Remove and Install - Right-Hand Duplex
C4.4 Engines Relay - Test - Aftertreatment Power Relay
G3500H 60Hz Generator Sets Maintenance Interval Schedule
C9.3 Marine Engine Fuel Lines - Remove and Install - Left-Hand Simplex
C9.3 Marine Engine Fuel Lines - Remove and Install - Left-Hand Duplex
2015/06/12 New Fuel System Components are Available for Certain G3500 Engines {1274, 1741, 5137}
2015/05/29 A New Oil Pan Is Used on Certain G3600 and C280 Engines {1302}
2015/06/26 New Software for Product Link PL522 Module Is Now Available for All Cat® Products {7606, 7620}