Support Link (Platform) - Install
Parts and Specification Information
Show/hide table
| |
| Illustration 1 | g03823842 |
Note: Verify that all parts are shipped and undamaged for preparation of assembly. Missing or damaged parts can be ordered prior to assembly to avoid delays during assembly.
Show/hide table
 |
|
Personal injury or death can occur from heavy components falling during removal or installation. Properly support the component with a suitable lifting device during removal or installation. |
Show/hide table
| Item | Part Number | Description | Qty | Specification | Approximate Weight |
| 1 | 431-7965 | Link | 2 | |
|
| 2 | 431-7968 | Pin | 2 | ||
| 3 | 7X-0378 | Bolt | 2 | ||
| 4 | 431-7969 | Pin Retainer | 2 | ||
| 5 | 6V-8182 | Nut | 2 |
- Install two links (1) to the underside of the platform.
- Secure each link (1) in place with one pin (2), one bolt (3), one pin retainer (4), and one nut (5).
Show/hide table
| |
| Illustration 2 | g03823863 |
|
An underside view of the platform | |
Caterpillar Information System:
C9.3 Marine Generator Set Engines Fuel System - Inspect
C9.3 Marine Generator Set Engines Electrical System
794 AC Off-Highway Truck Field Assembly Muffler - Install
C9.3 Marine Generator Set Engines Basic Engine
Welding The 3600/C280 Caterpillar Engine And Two Bearing Generator To The Base{1152, 1152} Welding The 3600/C280 Caterpillar Engine And Two Bearing Generator To The Base{1152, 1152}
C9.3 Marine Generator Set Engines Cooling System
C9.3 Marine Generator Set Engines Lubrication System
C27 and C32 Tier 4 Final Engines for MD6250 Drill and MD6310 Drill Fuel Priming Pump
C27 and C32 Engines for Caterpillar Built Machines Fuel Filter Base
C15 and C18 Engines for Caterpillar Built Machines Fan Drive
C15 and C18 Tier 4 Final Engines Diesel Particulate Filter - Clean
C9.3 Marine Generator Set Engines Air Inlet and Exhaust System
C9.3 Marine Generator Set Engines Finding Top Center Position for No. 1 Piston
C9.3 Marine Engine Fuel Filter Base - Remove and Install - Right-Hand Simplex
G3408 and G3412 Engines Coolant (NGEC) - Change
794 AC Off-Highway Truck Field Assembly Battery Box - Install
G3408 and G3412 Engines Maintenance Interval Schedule - Naturally Aspirated
G3408 and G3412 Engines Maintenance Interval Schedule - Turbocharged Aftercooled
G3408 and G3412 Engines Maintenance Interval Schedule - Standby
C9.3 Marine Engine Fuel Filter Base - Remove and Install - Right-Hand Duplex
G3500H 60Hz Generator Sets Additional Messages
PM620 and PM622 Cold Planer Air Compressor - Inspect
G3408 and G3412 Engines Coolant Level - Check
G3408 and G3412 Engines Coolant Sample (Level 1) - Obtain