1980/01/23 Caterpillar


Fuel Sulfur-Your Diesel's Silent Enemy

Usage:


The problem of wear caused by sulfur in diesel fuel is serious. At this time, there are confirmed reports of increasing amounts of sulfur in today's crude oils, particularly outside the United States and Canada and in coastal areas. Equipment users can expect to experience this wear at one time or another in the future.

A new full-color brochure entitled "Fuel Sulfur-Your Diesel's Silent Enemy" is available to help users reduce fuel sulfur damage to their diesel engines. The brochure tells what fuel sulfur wear is and why it is on the increase. It also describes the symptoms of fuel sulfur damage and tells what can be done to keep engine damage to a minimum.

If you haven't already done so, order sufficient copies of the "Fuel Sulfur-Your Diesel's Silent Enemy" brochure, Form SEBD0526, to distribute to all your customers.


"Fuel Sulfur-Your Diesel's Silent Enemy" alerts customers to the problems caused by the increased amounts of sulfur in today's diesel fuel.

Caterpillar Information System:

1980/01/09 New Exhaust Valve For Special Engine Applications
1980/01/09 New Linkage Kits With Improved Parts Are Available For Repair Of Front Power Takeoff Clutches
1980/01/09 List Of Service Publications
1980/01/09 Too Much Clearance For Exhaust Valves Can Cause Wear To The Camshaft Lobes And Valve Lifters
1980/01/09 Fuel Heaters Are Now Available For Field Installation
1980/01/09 Improved Ring Seal Used At Rear of Crankshaft
1980/01/09 Crankcase Capacity Increased; New Dimensions For Marks On Oil Level Gauge
1980/01/09 If Malfunction Of The Engine Fault Light In The Control Panel Of SR-4 Generators Is A Problem, A Toggle Switch Can Be Used In Its Place
1979/11/28 New Cylinder Block Has More Material Around Liner Seat Area
1979/11/28 List Of Service Publications
1979/11/28 New Cylinder Heads Are More Rigid And Stronger
1979/11/28 Common Sense Tips For Cab-Overs
1980/01/23 New Raw Water Engine Oil Cooler Is Used
1980/01/23 General Information-Diesel Fuels In Cold Temperature Operation
1980/01/23 Cooling System Improvements Prevent Expansion Tank Leakage
1980/01/23 New Fuel Injection Nozzle Assembly Used
1980/01/23 8N1831 Fuel Nozzle Assembly Now Approved For Use In 1693 Truck Engine; Chart For Applications Of 8N1831 And 7N5005 Fuel Nozzle Assemblies
1980/01/23 A Spring With A Lower Rate Is Now Used In The Fuel Filter Group To Give Less Fuel Pressure
1980/01/23 Extended Shafts Now Available For Front Power Takeoff Units
1980/02/06 Use The Correct Water Temperature Contactor
1980/02/06 Real Value Available Through Caterpillar Remanufacturing Programs
1980/02/06 New Cylinder Liner Has Improved Design To Keep Liner Temperatures Lower
1980/02/06 Change To Gear On Accessory Drive Shaft Assembly Gives Longer Service Life
1980/02/06 List Of Service Publications
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.