A New Engine Wiring Harness Is Available for Certain Cat 3512C Engines {1000, 1408}
- Engine:
- 3512C (S/N: MLM1-UP)
ReferenceSpecial Instruction, REHS9688, "Installation of the 468-4172 Wiring Harness Assembly On Certain 3512C Engines"
Description of Change: A new engine wiring harness is now used. The new harness includes abrasive resistant braiding which reduces stress on the internal wires. Two piece clamps and grommets have replaced ladder clips and grommets resulting in increased robustness of the assembly.
Adaptable To: The new 468-4172 Engine Wiring Gp replaces the existing 448-5383 Engine Wiring Gp and the previous 290-2633 Engine Wiring Gp .
This change is effective with and adaptable to the serial numbers listed in Table 1.
Show/hide table
New Engine Wiring Harness     | ||
Model     | Effective with     | Adaptable to     |
3512C     | S/N:MLM00272-UP     | S/N:MLM00001-00271     |
Caterpillar Information System:
3500 Generator Sets with Dynamic Gas Blending Product Lifting
C7.1 Engines Sensor Signal (Analog, Passive) - Test
C4.4 and C7.1 Engines Relay - Test - Start Relay
C2.2 Engines for Caterpillar Built Machines Engine Oil Pump - Install
C7.1 Engines Relay - Test - ECM Power Relay
794 AC Off-Highway Truck Power Train Interface Module - Remove and Install - Motor No.2
794 AC Off-Highway Truck Power Train Interface Module - Remove and Install - Motor No. 1
794 AC Off-Highway Truck Power Train Phase Module - Remove and Install
C8.7 and C12.9 Marine Engines ECM - Replace
C8.7 and C12.9 Marine Engines Electromagnetic Clutch - Test
2015/03/17 Procedure to Improve Reporting into VisionLink after Re-Registration of Product Link Systems PL121/321 {7606}
C8.7 and C12.9 Marine Engines Oil Filter Differential Pressure Problem
794 AC Off-Highway Truck Power Train Inverter - Remove and Install - Retarding Grid Blower
C7.1 Engines Sensor Supply - Test
C8.7 Marine Engines Fuel Temperature Sensor
Air/Fuel Ratio Setup for Certified G3306B Generator Set Engines{1278} Air/Fuel Ratio Setup for Certified G3306B Generator Set Engines{1278}
C8.7 Marine Engines Electric Starting Motor
2015/03/06 New Power Train Software Is Available to Ensure Compatibility with the Multi-Station Control System (MSCS) Used on C8.7 Marine Engines {7620}
C280-16 Tier 4 Marine Engine and C280-12 Tier 4 Marine Engine Catalyst - Remove and Install - 12 Cylinder
C8.7 Marine Engines Piston Cooling Jet
C8.7 Marine Engines Engine Oil Pan
C8.7 Marine Engines Valve Mechanism Cover
C8.7 Marine Engines Gear Group (Rear)
C8.7 Marine Engine Transmission Oil Cooler - Remove and Install