Excavator Pins (Boom and Boom Cylinder)
Show/hide table
Illustration 1 | g03732242 |
Show/hide table
Specification for 339-4055 Excavator Pin Gp | |||
Item | Qty | Part | Specification Description |
Before assembly, use black 5P-0960 Grease Cartridge in order to coat all the pin bores. | |||
1 | 1 | 343-9295 Pin As | Diameter is Clearance between the pin end and the side of the cab must be kept over |
2 | As required, use the following shims in order to adjust the maximum lateral clearance of |
||
1 | 308-8775 Shim | Thickness is |
|
2 | 308-8776 Shim | Thickness is |
|
1 | 308-8777 Shim | Thickness is |
|
3 | 2 | 154-0480 Pin As | Diameter is |
4 | As required, use the following shims in order to adjust the lateral clearance to |
||
2 | 133-2425 Shim | Thickness is |
|
4 | 093-0083 Shim | Thickness is |
|
2 | 093-0115 Shim | Thickness is |
Caterpillar Information System:
458-7815 Top End Overhaul Foundational Kit for 3508 Petroleum Engines{1000} 458-7815 Top End Overhaul Foundational Kit for 3508 Petroleum Engines{1000}
C3.4B Engines Sensor Signal (Analog, Passive) - Test
2015/02/26 An Improved Yoke Assembly is Used in the Transmission Arrangement on Certain 773 and 775 Off-Highway Trucks {3030, 3159}
458-9975 Top End Overhaul Foundational Kit for 3508 Petroleum Engines{1000} 458-9975 Top End Overhaul Foundational Kit for 3508 Petroleum Engines{1000}
320D and 323D Excavators Machine System Specifications Swing Drive
323F SA and 323F LN Excavator and 323F LN MHPU Machine Systems Specifications Handrail
C3.4B Engines Sensor Signal (Analog, Active) - Test - Exhaust Gas Pressure Sensor
C3.4B Industrial Engine Maintenance Interval Schedule
C3.4B Engines Sensor Signal (Analog, Active) - Test
C3.4B Industrial Engine Engine Rating Conditions
C3.4B Industrial Engine Engine Rating Definitions
C175-16 PETROLEUM ENGINES Engine Oil Screen - Remove and Install
458-6550 Top End Overhaul Foundational Kit for 3508 Petroleum Engines{1000} 458-6550 Top End Overhaul Foundational Kit for 3508 Petroleum Engines{1000}
Bench Test Procedure for Hydraulic Piston Pumps {1387, 5070, 5070} Bench Test Procedure for Hydraulic Piston Pumps {1387, 5070, 5070}
2014/10/09 New Harness Components Now being Used on Filter Bypass Warning Harness on Certain TH55-E70-3512CP, TH55 FT-E70, and TH55 FT-E90 Transmissions {1408, 1435, 3067}
2015/02/20 New Cable Straps Are Used on the Aftertreatment Sensors of Certain C9.3 Through C13 Engines {1408, 1900}
2015/03/25 Service Tool Connector Pin Out Update For Certain 3512C Engines {1408, 7553}
Selective Catalytic Reduction Retrofit Aftertreatment Electrical Power Supply - Test
2015/07/10 Cat® Reman Now Offers Additional Long Blocks for Certain Machine Engines {1000, 1201}
2014/10/10 Cat® Reman Now Offers Additional Long Blocks for Certain Engines {1000, 1201}
323F SA and 323F LN Excavator and 323F LN MHPU Machine Systems Specifications Boom Lighting
320D3 and 323D3 Excavators Machine System Specifications Hood
323F SA and 323F LN Excavator and 323F LN MHPU Machine Systems Specifications Front Lines
C7 and C9 Industrial Engines Sensor Signal (Analog, Active) - Test