Battery or Battery Cable - Inspect/Replace
Show/hide table
Illustration 1 | g03663619 |
Cover removed for clarity |
Note: When you replace the batteries, always use the same type of battery. This machine requires Maintenance Free batteries or Low Maintenance High Output batteries.
- Prepare the machine for maintenance. Refer to Operation and Maintenance Manual, "Prepare the Machine for Maintenance".
- Turn the engine start switch to the OFF position. Turn all of the switches to the OFF position.
- Turn the battery disconnect switch (1) to the OFF position. Lock out the battery disconnect switch.
- Remove the battery access covers.
- Disconnect the negative end "−" of the battery cable from the frame near the battery disconnect switch.
Note: Do not allow the disconnected battery cable to contact the battery disconnect switch.
- Disconnect the negative end "−" of the battery cable from the battery.
- Disconnect the positive end "+" of the battery cable from the battery.
- Replace the battery or make all necessary repairs to the battery.
- Connect the positive end "+" of the battery cable to the battery.
- Connect the negative end "−" of the battery cable to the battery.
- Connect the negative end "−" of the battery cable to the frame near the battery disconnect switch.
- Install the battery access covers.
- Remove the lockout for the battery disconnect switch. Turn the battery disconnect switch to the ON position.
Caterpillar Information System:
794 AC Off-Highway Truck Air Cooling Duct - Check/Clean - Outlet Screens
794 AC Off-Highway Truck Adapter Bearing (Blower Fan) - Lubricate
794 AC Off-Highway Truck Prepare the Machine for Maintenance
C15 and C18 Engines for Caterpillar Built Machines Venturi Tube - Remove and Install
3512C Engine Fuel Transfer Pump - Remove
C13 Industrial Engine Venturi Tube - Remove and Install
794 AC Off-Highway Truck Engine Starting with Jump Start Cables
390F Excavator Fuel Filter (Secondary) and Fuel Filter Base - Remove and Install
794 AC Off-Highway Truck Towing With Inoperable Engine
794 AC Off-Highway Truck Disabled Machine Recovery
C13 Engine for Caterpillar Built Machines Venturi Tube - Remove and Install
G3306B Generator Sets Generator Operation
794 AC Off-Highway Truck Braking System - Test
G3306B Generator Sets Single Unit Operation
794 AC Off-Highway Truck Breather (Final Drive) - Replace
G3306B Generator Sets Parallel Operation
794 AC Off-Highway Truck Breather (Front Axle) - Replace
C15 and C18 Industrial Engines Venturi Tube - Remove and Install
794 AC Off-Highway Truck Breather (Hoist and Brake Tank) - Replace
794 AC Off-Highway Truck Electric Cable - Check - High Voltage Harness
2014/05/16 New Pressure Isolation Valves Are Used with Certain C18 and C32 Marine Engines Equipped with Alarm and Protection {1906, 1907, 1912, 1917, 1923, 1924, 1925, 1928, 1929, 7422}
G3306B Generator Sets Voltage Regulators
3512C Engine Fuel Transfer Pump - Install
794 AC Off-Highway Truck Electrical Ground Stud - Inspect/Clean/Tighten