Pressure Sensor (NRS Differential) - Remove and Install
Removal Procedure
- Remove cable straps (1). Disconnect harness assembly (2). Remove bolts (3) and pressure sensor (NRS differential) (4) .
Show/hide table
Illustration 1 | g03662267 |
Installation Procedure
- Install pressure sensor (NRS differential) (4) in the reverse order of removal.
- Tighten bolts (3) to a torque of 20 ± 2 N·m (177 ± 18 lb in).
Caterpillar Information System:
C8.7 Marine Engines Finding Top Center Position for No. 1 Piston
C9.3 Industrial Engine Pressure Sensor (NRS Absolute) - Remove and Install
C9.3 Engines for Caterpillar Built Machines Pressure Sensor (NRS Differential) - Remove and Install
C9.3 Engines for Caterpillar Built Machines Pressure Sensor (NRS Absolute) - Remove and Install
C13 Industrial Engine Pressure Sensor (NRS Differential) - Remove and Install
2014/07/25 A New Air Shutoff Group Is Available on Certain 3512B Engines {1078}
C13 Industrial Engine Pressure Sensor (NRS Absolute) - Remove and Install
C15 and C18 Industrial Engines Pressure Sensor (NRS Differential) - Remove and Install
C15 and C18 Industrial Engines Pressure Sensor (NRS Absolute) - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines Pressure Sensor (NRS Differential) - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines Pressure Sensor (NRS Absolute) - Remove and Install
Cat® Command For Hauling Electrical Connector - Inspect
C8.7 Marine Engines Engine Valve Lash - Inspect/Adjust
794 AC Off-Highway Truck Power Receptacle - 24V
390F Excavator Fuel Filter and Water Separator Base - Remove and Install
794 AC Off-Highway Truck Engine Shutdown Control - Push Button
794 AC Off-Highway Truck Backup Alarm
3512C Engine Fuel Filter Housing - Install
794 AC Off-Highway Truck Braking
794 AC Off-Highway Truck Changing Direction and Speed
794 AC Off-Highway Truck Retarding
Rotor Shaft End Play Non-Zero Measurement And Adjustment Procedure On Series 2000 and 3000 (20 kW - 100 kW) Alternators {4450, 4457} Rotor Shaft End Play Non-Zero Measurement And Adjustment Procedure On Series 2000 and 3000 (20 kW - 100 kW) Alternators {4450, 4457}
794 AC Off-Highway Truck Operation Information
794 AC Off-Highway Truck Engine Starting