374F and 390F Excavators and 390F MHPU Mobile Hydraulic Power Unit Caterpillar


Boom Up (Single Function) Speed Is Slow

Usage:

374F L AP4
注: 开始任何故障排除步骤前,参考故障排除, "故障排除症状"。 使用 Cat® 电子技师(Cat ET)维修工具或机器监视器检查有无现行诊断代码。 如果存在诊断代码,请参阅相应的诊断代码故障排除步骤排除此故障然后再继续下一步。

表 1
相关部件:     可能原因:     推荐行动:    
阀/管路     动臂沉降阻尼阀(DRV)提升阀故障     参考故障排除, "沉降阻尼阀 - 功能测试"    
主安全阀故障 参考故障排除, "安全阀(主)- 功能测试"    
主安全阀压力设置低
动臂独立计量阀(IMV)部分中的补偿滑阀故障 参考故障排除, "IMV 控制性能故障排除" (2)    
动臂缸盖端(HE)管路安全阀故障 参考故障排除, "安全阀(管路)- 功能测试" (1)
参考测试和调整, KENR9615, "安全阀(管路)- 测试和调整"    
动臂 HE 管路安全阀压力设置低
动臂泵至油缸缸盖端(PCHE)IMV 滑阀故障 参考故障排除, "IMV 标定 - 功能测试" (1)
参考故障排除, "IMV 控制性能故障排除" (2)    
动臂油缸至油箱连杆端(CTRE)IMV 滑阀故障
先导压力低 参考测试和调整, KENR9615, "安全阀(先导)- 测试和调整"    
合流滑阀故障 参考故障排除, "泵行程 - 功能测试"    
暖机阀故障 参考故障排除, "液压系统预热 - 功能测试"    
驱动或惰轮泵旁通滑阀故障 参考故障排除, "旁通阀(ACS 阀)- 功能测试"    
先导安全阀故障 参考测试和调整, KENR9615, "安全阀(先导)- 测试和调整"    
电子设备/线束/电磁阀     动臂/铲斗操纵手柄故障     参考故障排除, "操纵手柄 - 功能测试" (1)    
动臂 PCHE 比例液压调节阀(PHMV)故障 参考故障排除, "IMV 标定 - 功能测试" (1)
参考故障排除, "IMV 控制性能故障排除" (2)    
动臂 CTRE PHMV 故障
惰轮泵旁通 PHMV 故障 参考故障排除, "旁通阀(ACS 阀)- 功能测试"    
驱动泵旁通 PHMV 故障
合流 PHMV 故障 参考故障排除, "合流阀 - 功能测试"    
ECM 故障。 ECM 不太可能有故障 更换 ECM 之前,务必向代理商的技术通信员征求 Caterpillar 可能的意见。 此咨询可能影响修理时间。 遵循故障诊断与排除, "ECM - 更换"中的步骤,以便更换 ECM    
软件     惰轮泵旁通标定不正确     参考故障排除, "旁通阀(ACS 阀)- 功能测试"    
驱动泵旁通标定不正确
动臂 PCHE PHMV 突破电流不正确 参考故障排除, "IMV 标定 - 功能测试" (1)    
动臂 PCHE PHMV 斜率电流不正确
动臂 CTRE PHMV 突破电流不正确 参考故障排除, "IMV 标定 - 功能测试" (1)    
动臂 CTRE PHMV 斜率电流不正确
合流标定不正确 参考故障排除, "合流阀 - 功能测试"    
泵/马达/油箱     前泵或后泵不能上升     参考测试和调整, KENR9615, "泵流量测量"    
发动机     发动机转速低     参考故障排除, "液压功率 - 功能测试"    
( 1 ) 指示在故障排除过程中应第一个完成的动作。
( 2 ) 指示在故障排除过程中应作为最终选项考虑的功能测试。

Caterpillar Information System:

C280-08 Marine Engine Reference Information
C15 and C18 Petrolem Generator Set Engines Solenoid Valve - Test
374F and 390F Excavators and 390F MHPU Mobile Hydraulic Power Unit Implement Operation Is Uncontrollable During Travel
374F and 390F Excavators and 390F MHPU Mobile Hydraulic Power Unit Travel Speed Is Slow
C4.4 Marine Generator Set Indicator Lamps
Procedure to Flash the ADEM 3 Engine Electronic Control Gp {1901, 1920} Procedure to Flash the ADEM 3 Engine Electronic Control Gp {1901, 1920}
C15 and C18 Petrolem Generator Set Engines Variable Valve Actuator Response - Test
374F and 390F Excavators and 390F MHPU Mobile Hydraulic Power Unit Track (LH) Does Not Travel
374F and 390F Excavators and 390F MHPU Mobile Hydraulic Power Unit Track (RH) Does Not Travel
374F and 390F Excavators and 390F MHPU Mobile Hydraulic Power Unit Swing Speed Is Slow
F Series Excavator Monitoring System Input Components
374F and 390F Excavators and 390F MHPU Mobile Hydraulic Power Unit Swing Velocity Is Not Smooth
374F and 390F Excavators and 390F MHPU Mobile Hydraulic Power Unit Boom Up Does Not Function
C280-08 Marine Engine Control Panel
390F Excavator Machine Systems Counterweight - Remove and Install
2015/05/22 New Software Is Used on Certain C27 Industrial Engines {1901, 1920}
374F and 390F Excavators and 390F MHPU Mobile Hydraulic Power Unit Boom Up Does Not Respond To Progressive Joystick Motion
374F and 390F Excavators and 390F MHPU Mobile Hydraulic Power Unit Boom Down (Single Function) Speed Is Slow
374F and 390F Excavators and 390F MHPU Mobile Hydraulic Power Unit Boom Down Does Not Function
374F and 390F Excavators and 390F MHPU Mobile Hydraulic Power Unit Boom Down Does Not Respond To Progressive Joystick Motion
C280-08 Marine Engine Engine Protective Devices - Check
C4.4 Marine Generator Set Replacing the ECM
C4.4 Marine Generator Set Engine Wiring Information
C4.4 Marine Generator Set Engine Oil and Filter - Change
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.