New Software for the Turbocharger Protection Strategy on C7.1 Engines {1052, 1901, 1920}
- Industrial Engine:
- C7.1 (S/N: 7701-1,253-270,272-282,284-294,299-313,315-331,333-382,384-393,395-415,417-876,887-942,948-952,954-990,992-1011,1013-1173,1176-1205,1207-1209,1211-1213,1217-1223,1225-1227,1231-1231,1235-1245,1247-1262,1264-1301,1303-1311,1314-1314,1321-1326,1328-1330,1332-1332,1336-1337,1338-1339)
- Generator Set:
- C7.1 (S/N: MRP1-127,129-278)
Description of Change: New engine software has been introduced to offer enhanced protection to the turbocharger immediately following engine start in very cold conditions.
The new software holds the engine at a safe speed until the engine systems have stabilized.
The time the engine is held at a safe speed will vary depending on many factors, including ambient temperature, and engine oil grade.
Refer to table 1 and table 2 in order to view the old and the new software part numbers.
Adaptable To:
Show/hide table
Industrial Engines     | |
Old Part Numbers     | New Part Numbers     |
4161945     | 4451775     |
4164689     | 4413552     |
4177620     | 4319505     |
4164571     | 4320089     |
4320089     | 4419941     |
4164576     | 4450434     |
4164571     | 4450448     |
Show/hide table
Generator Set     | |
Old Part Numbers     | New Part Numbers     |
3934670     | 4478672     |
3998631     | 4321892     |
Caterpillar Information System:
Proper Remanufactured Turbocharger Housing Adjustment and Alignment for Caterpillar Engines {1052, 1053} Proper Remanufactured Turbocharger Housing Adjustment and Alignment for Caterpillar Engines {1052, 1053}
193-4124 Rear Wheel Bearing Preload Adjuster for 793 Off-Highway Trucks{0374, 0599, 0700, 0722, 0727, 0731} 193-4124 Rear Wheel Bearing Preload Adjuster for 793 Off-Highway Trucks{0374, 0599, 0700, 0722, 0727, 0731}
C8.7 Marine Engine Exhaust Piping - Check
UPS 750 Uninterruptible Power Supply System Overview
C12.9 Marine Engines Battery - Clean/Check
C175-16 Engine Maintenance Interval Schedule
CX31-P600 Petroleum Transmission Transmission Hydraulic Control
2013/10/03 Mandatory Firmware Update Upon Site Visit on Uninterruptible Power Supply {4480, 7620}
C12.9 Marine Engines Fuel System Primary Filter (Water Separator) Element - Replace
793F and 793F CMD Off-Highway Truck Braking System Control Valve (Brake) - If Equipped
243-0765 Bench Model Hose Machine For Use With the 242-3567 Variable Crimp Die Bowl{0374, 0599, 0684, 0738, 5057} 243-0765 Bench Model Hose Machine For Use With the 242-3567 Variable Crimp Die Bowl{0374, 0599, 0684, 0738, 5057}
793F and 793F CMD Off-Highway Truck Braking System Valve (Unloader)
C8.7 Marine Engine Safety Messages
3512E Tier 4 Final Engines for Land Electric Drilling Fuel Temperature Is High
C8.7 Marine Engine Plate Locations and Film Locations
C8.7 Marine Engine Engine Starting
374F and 390F Excavators and 390F MHPU Mobile Hydraulic Power Unit Sensor Supply - Test
C11 and C13 Engines for Caterpillar Built Machines Finding Top Center Position for No. 1 Piston
C8.7 Marine Engine Emissions Certification Film
C15 Petroleum Engine Gauges and Indicators
UPS 750 Uninterruptible Power Supply Abbreviations and Acronyms
C15 Petroleum Engine Monitoring System
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705} Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
C15 Petroleum Engine Refill Capacities