Transmission Hydraulic Control
Show/hide table
| |
| Illustration 1 | g03383223 |
|
Left side view | |
Show/hide table
| Specification for 386-3182 Transmission Hydraulic Control Gp and 386-3183 Transmission Hydraulic Control Gp | |||
| Item | Qty | Part | Specification Description |
| 1 | 1 | 126-1773 Connector Cap | Torque to |
| 2 | 1 | - | Tighten the transmission harness assembly to |
| 3 | 1 | 214-2485 Speed Sensor Gp | Lubricate the bore of the O-ring seal for the speed sensor group lightly with the lubricant that is being sealed. |
| 4 | 2 | 6V-8352 O-Ring Seal | Lubricate the bore lightly with the lubricant that is being sealed. |
| 5 | 2 | 250-7194 Special Bolt | Torque to |
Show/hide table
| |
| Illustration 2 | g03383224 |
|
Top view | |
Show/hide table
| |
| Illustration 3 | g03383225 |
|
Rear view | |
Show/hide table
| Item | Qty | Part | Specification Description |
| 6 | 3 | 236-6222 Speed Sensor Gp | Lubricate the bore of the O-ring seal for the speed sensor group lightly with the lubricant that is being sealed. |
| 7 | 1 | 294-2709 Wire As | Torque to |
| 8 | 2 | 234-5013 Temperature Sensor Gp | Torque to |
Show/hide table
| |
| Illustration 4 | g03383233 |
|
Bottom view | |
Show/hide table
| Item | Qty | Part | Specification Description |
| 9 | 1 | 214-7568 O-Ring Seal | Before assembly, lubricate the bore lightly with the lubricant that is being sealed. |
| 10 | 1 | 6V-3965 Fitting | Torque to |
| 11 | 12 | 285-9066 Bolt | Torque to |
| 12 | 1 | 183-3409 Plug As | Torque to |
| 13 | 1 | 276-4166 Flow Control Valve As | Before assembly, lubricate the bore lightly with the lubricant that is being sealed.
Torque to |
Caterpillar Information System:
2013/09/20 A Rework Procedure for the Power Access Stairway (PAS) On Certain Off-Highway Trucks is Now Available {7253}
2013/09/27 New Software Is Now Available for All Cat® Products With The Product Link 522 System {7606}
Rework Procedure for the PAS (Powered Access Stairway) on Certain Off-Highway Trucks{0679, 7253, 7254, 7255} Rework Procedure for the PAS (Powered Access Stairway) on Certain Off-Highway Trucks{0679, 7253, 7254, 7255}
LC5000, LC6100, and LC7000 Electric Power Generation Exciter Armature - Remove and Install
C280-16 Engine Priority Valve - Install
3512C Petroleum Engines with Dynamic Gas Blending Data Link - Test
C280-16 Engine Auxiliary Water Pump - Install
C280-16 Engine Auxiliary Water Pump - Remove
LC5000, LC6100, and LC7000 Electric Power Generation Rotor - Remove and Install
LC5000, LC6100, and LC7000 Electric Power Generation Terminal Assembly - Remove and Install
LC5000, LC6100, and LC7000 Electric Power Generation Permanent Magnet Pilot Exciter - Remove and Install - PMG
LC5000, LC6100, and LC7000 Electric Power Generation Generator - Remove
C1.7, C1.8 and C2.4 Tier 4 Interim and EU Stage 3A Engines for Caterpillar Built Machines Engine Oil Pressure Switch
SR4 and SR4B Electric Power Generation Rewind Data Winding Data for 126-8022 Generator through 128-7424 Generator
SR4 and SR4B Electric Power Generation Rewind Data Winding Data for 136-6580 Generator through 136-6609 Generator
SR4 and SR4B Electric Power Generation Rewind Data Winding Data for 141-5534 Generator through 142-9900 Generator
312D2 and 313D2 Excavators System Pressure Release
3512C Petroleum Engines with Dynamic Gas Blending Engine Shutdown Occurrence
SR4 and SR4B Electric Power Generation Rewind Data Winding Data for 144-1666 Generator through 144-1766 Generator
SR4 and SR4B Electric Power Generation Rewind Data Winding Data for 136-6610 Generator through 136-6641 Generator
SR4 and SR4B Electric Power Generation Rewind Data Winding Data for 144-1964 Generator through 144-2088 Generator
SR4 and SR4B Electric Power Generation Rewind Data Winding Data for 149-2447 Generator through 150-9152 Generator
SR4 and SR4B Electric Power Generation Rewind Data Winding Data for 158-6410 Generator through 163-8546 Generator
SR4 and SR4B Electric Power Generation Rewind Data Winding Data for 164-0975 Generator through 164-4946 Generator