Plate Locations and Film Locations
Caterpillar engines are identified by serial numbers and by arrangement numbers. These numbers are shown on the engine serial number plate. Caterpillar dealers need these numbers in order to determine the components that were included with the engine. Providing accurate numbers permits accurate identification of replacement part numbers.
The engine serial number plate is located on the left side of the engine block for all engine models in the series.
Show/hide table
| |
| Illustration 1 | g01422006 |
|
Typical Serial number plate | |
Note: This information is pertinent in the united States and Canada.
Typical examples are shown.
Show/hide table
| |
| Illustration 2 | g01350379 |
|
This label is installed on engines that comply with the laws on emissions from the EPA. | |
Show/hide table
| |
| Illustration 3 | g01153881 |
|
This label is installed on engines that do not comply with the laws on emissions from the EPA. | |
Caterpillar Information System:
C280-16 Engine Gauges and Indicators
UPS 750 Uninterruptible Power Supply System Bypass Operation
UPS 750 Uninterruptible Power Supply System Startup
UPS 750 Uninterruptible Power Supply Site Preparation
UPS 750 Uninterruptible Power Supply General Information (Installation)
2013/03/15 DC Circuit Breaker Test Procedure on Certain Uninterruptible Power Supply {1420, 4480}
UPS 750 Uninterruptible Power Supply Pager Configuration
G3406 and G3412 Generator Sets Maintenance Interval Schedule - Bio-Gas
G3406 and G3412 Generator Sets Maintenance Interval Schedule - Naturally Aspirated
C7.1 Marine Engine Position Sensor (Fuel Injection Pump) - Remove and Install - Flow Control Valve
UPS 750 Uninterruptible Power Supply Modes Of Operation
UPS 750 Uninterruptible Power Supply Electrical Connections
C4.4 Generator Sets Voltage Regulators
349F and 352F Excavators Machine System Specifications Auxiliary Pump Drive and Mounting
C4.4 and C7.1 Engines Power Is Intermittently Low or Power Cutout Is Intermittent
C4.4 and C7.1 Engines Valve Lash Is Excessive
349E Excavator Machine System Specifications Hydraulic Filter and Lines
Marine Engine Control Panel I General Information
C3.4B Industrial Engine Diesel Particulate Filter - Wall Flow Diesel Particulate Filter (DPF)
Marine Engine Control Panel I Dimensions
2013/10/16 Improved Water Manifold Gaskets Are Used for Certain 3500 Machine Engines {1124, 1380, 7555}
2013/10/17 Improved Water Manifold Gaskets Are Used on Certain 3500 Engines {1124, 1380, 7555}
374F Excavator Hydraulic System Electronic Control (Main Pump System)
C3.4B Industrial Engine Flexible Exhaust Pipe