Accessory Drive (Lower Left Hand, Reverse Rotation)
Show/hide table
Illustration 1 | g03334194 |
Rear view |
Show/hide table
Specification for 380-5018 Accessory Drive Gp | |||
Item | Qty | Part | Specification Description |
1 | 1 | 7C-3258 Thrust Washer Assembly | Thickness of the new thrust washer is |
2 | 1 | 7N-2047 Dowel | Extension of the new dowel is |
3 | 4 | 7N-7539 Thrust Washer | Thickness is |
Show/hide table
Illustration 2 | g03334196 |
Show/hide table
Item | Qty | Part | Specification Description |
4 | 1 | 259-4598 O-Ring Seal | Before assembly, lightly lubricate the bore with the lubricant that is being sealed. |
5 | 1 | 116-3242 Idler Gear As | After installation, bore of 116-1365 Bearing is Installation depth of bearing is |
6 | 1 | 7C-3259 Shaft | Diameter is |
7 | 2 | 7N-5874 Auxiliary Drive Shaft | Diameter is Width of the groove for the thrust washer (3) is |
Caterpillar Information System:
390F Excavator Plate Locations and Film Locations
3500 Industrial Engines Cylinder Block
3500C Marine Engines Accessory Drive (Lower Left Hand, Reverse Rotation)
3500 Engines for Caterpillar Built Generator Sets Radiator
3500 Engines for Caterpillar Built Generator Sets Crankcase Breather
3500 Engines for Caterpillar Built Generator Sets Crankcase Breather
3500C Marine Engines Gear Group (Front) - Reverse Rotation
C7.1 Industrial Engine Engine Electronics
3500 Engines Flywheel Housing Cover
3500C Marine Engines Gear Group (Front) - Reverse Rotation
3500C Marine Engines Gear Group (Rear)
C1.5 and C2.2 Industrial Engines ARD Nozzle - Test
3500 Engines for Caterpillar Built Generator Sets Accessory Drive (Upper Right Hand)
3512B and 3516B Engines Engine Oil Cooler - Install
3500C Marine Engines Accessory Drive (Lower Left Hand, Reverse Rotation)
3500 Engines for Caterpillar Built Generator Sets Tachometer Drive
3500C Marine Engines Accessory Drive (Lower Left Hand, Reverse Rotation)
2012/12/20 Correct Turbocharger Hose Clamp Location for 345C, 345D, and 349D Excavators and Mobile Hydraulic Power Units {1052, 1071, 7553}
3512B and 3516B Engines Inlet and Exhaust Valves - Remove and Install
C13, C15, and C18 Tier 4 Interim Engines Diesel Particulate Filter Temperature Is High
C18 Industrial Engine Intake Manifold Air Temperature Is High
Failures on the 256-5984 Rotocoil As Installed in C175 Engines{1100, 1109} Failures on the 256-5984 Rotocoil As Installed in C175 Engines{1100, 1109}
3500 Engines for Caterpillar Built Generator Sets Vibration Damper
3512E Tier 4 Final Engines for Land Electric Drilling Air Starting Motor Pressure Regulating Valve