Auxiliary Water Pump - Disassemble
Show/hide table
Required Tools | |||
Tool | Part Number | Part Description | Qty |
A | 8S-2264 | Puller Gp | 1 |
6V-5223 | Bolt | 2 | |
4B-4277 | Washer | 2 | |
B | 9S-9152 | Bearing Puller Gp | 1 |
Start By:
- Remove the auxiliary water pump. Refer to Disassembly and Assembly, "Auxiliary Water Pump - Remove".
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Remove O-ring seal (1) from housing assembly (2).
- Use Tooling (A) to remove impeller (3) from the shaft.
Show/hide table
Illustration 2 g02441241 - Remove bolts (5).
- Invert housing assembly (2). Use a suitable press to remove the shaft, the bearing assembly, retainer (6), and gear (4) from housing assembly (2).
Show/hide table
Illustration 3 g02441278 - Use Tooling (B) and a suitable press to remove gear (4) from shaft (8). Remove retainer (6).
- Use Tooling (B) and a suitable press to remove bearing assembly (7) from shaft (8).
Show/hide table
Illustration 4 g02441298 - Drive or press seal assembly (10) from housing assembly (2).
- Invert the housing assembly and drive or press lip type seal (9) from housing assembly (2).
Show/hide table
Illustration 1 | g02440321 |
Caterpillar Information System:
793F Off-Highway Truck Machine Systems Valve (Suspension Cylinder Charging) - Remove and Install - Front Suspension Cylinder
UPS 1000Z, UPS 1200Z, UPS500G and UPS600G Uninterruptible Power Supplys Transfer Operation
C15 Petroleum Engines Auxiliary Water Pump - Install
C15 Petroleum Engines Auxiliary Water Pump - Remove
Installation Procedure of International Protection Rating (IP32) for the UPSB505{4480} Installation Procedure of International Protection Rating (IP32) for the UPSB505{4480}
CX31 and CX31 HT On-Highway Transmissions Reference Material
CX31 and CX31 HT On-Highway Transmissions Transmission Oil Sample - Obtain
CX31 and CX31 HT On-Highway Transmissions Transmission Oil Level - Check
CX31 and CX31 HT On-Highway Transmissions Transmission Oil - Change
CX31 and CX31 HT On-Highway Transmissions Oil Filter (Transmission) - Replace
CX31 and CX31 HT On-Highway Transmissions Magnetic Screen (Transmission) - Clean
CX31 and CX31 HT On-Highway Transmissions Breather (Transmission) - Clean
2011/03/02 New Software Is Used on C175-16 Generator Sets {1901, 1920}
C13, C15, and C18 Tier 4 Interim Engines Data Link - Test
Nitrogen Pressure Test Unit FT2724 {4150, 4159, 4169, 4170, 4171, 4174, 4175, 4180} Nitrogen Pressure Test Unit FT2724 {4150, 4159, 4169, 4170, 4171, 4174, 4175, 4180}
C15 Petroleum Engines Auxiliary Water Pump - Assemble
UPSB505 Uninterruptible Power Supply Cable Size Requirement
UPS 1000Z, UPS 1200Z, UPS500G and UPS600G Uninterruptible Power Supplys Electrical Connections
2011/06/16 New Fuel Pressure Regulators Are Used on Certain C7 and C9 Engines {1715}
UPS 1000Z, UPS 1200Z, UPS500G and UPS600G Uninterruptible Power Supplys Initial Startup Procedure
UPS 1000Z, UPS 1200Z, UPS500G and UPS600G Uninterruptible Power Supplys Pager Configuration
UPS 1000Z, UPS 1200Z, UPS500G and UPS600G Uninterruptible Power Supplys Interfaces
C15 Petroleum Engines Aftercooler - Remove
C15 Petroleum Engines Aftercooler - Install