CX31 and CX31 HT On-Highway Transmissions Caterpillar


Maintenance Recommendations

Usage:

CX31 D9F
Efficiency and transmission performance depends on adherence to proper operation and maintenance recommendations and the use of recommended oils, filters, and parts. Caterpillar recommends that major adjustments and repairs be made by your authorized Cat dealer.

Various transmission oil additives which claim to reduce wear, stop leaks, or improve efficiency are available commercially. Although additives have been used to solve some isolated field problems, additives are not recommended for general use. The recommended transmission lubricants and replaceable service parts are listed under Lubricant Viscosities and Oil Filter Replace in this manual.

Take corrective steps immediately if worn parts which may affect performance are discovered. The steps taken are to ensure the proper operation of the transmission and the transmissions control systems. The use of genuine Caterpillar parts is recommended. Suppliers of non-Caterpillar parts must ensure the owner that the use of such parts will not adversely affect the performance, reliability, or durability level of the transmission. Regular maintenance intervals with a special emphasis on the following items are necessary in order to maintain the reliability and durability of the transmission. Refer to the Operation and Maintenance Manual, SEBU8192-01, to determine the appropriate application factor for your transmission. See the General Applications and Severe Application for limits and definitions. See your authorized Cat dealer in order to help analyze your specific application, operating environment, and maintenance intervals.

DAILY INSPECTIONS - The oil level of the transmission should be checked daily. Do not operate a transmission with a low oil level. Check for mud and debris buildup around the controls. Observe that the oil and electrical lines are unobstructed.

OIL AND SERVICE INTERVALS - Do not exceed the recommended service intervals. Extended transmission oil and filter usage depends upon acceptable SOS analysis. DO not go to extended oil and filter changes without SOS data.

ELECTRONIC CONTROL UNIT - This component is a device that is designed to control transmission operation with respect to the engine, ground speed, and operator input. Any erratic transmission behavior may indicate a need for replacement or repair. Your Cat dealer is equipped with the necessary tools, personnel, and procedures in order to perform this service. The owner is encouraged to keep adequate maintenance records. However, the absence of such records will not invalidate the warranty. Refer to the Maintenance Records and Maintenance Log sections of this manual.

The vehicle owner may perform routine maintenance, repairs, and other work that is outside of the warranty. The work may be done at any repair facility. Such work does not need to be performed at a designated station that is determined by the warranty in order for the warranty to remain in force.

Caterpillar Information System:

CX31 and CX31 HT On-Highway Transmissions Transmission Control
CX31 and CX31 HT On-Highway Transmissions Serial Number Plate
CX31 and CX31 HT On-Highway Transmissions Safety Messages
TA19 Transmission Transmission - Disassemble
UPSB505 Uninterruptible Power Supply Circuit Breaker Recommendation
C8.7 Marine Engines Battery - Test
621H, 623H and 627H Wheel Tractor-Scrapers Braking and Hydraulic Fan System Pressure Sensor (Brake Oil Accumulator)
C15 Petroleum Engines Engine Oil Cooler - Install
2011/02/24 Wheel Loader Bucket Lifting Point Color Change {6001, 6101, 6102, 6104, 6110, 6131, 6132, 6529, 6531, 6704}
CX31 and CX31 HT On-Highway Transmissions Capacities (Refill)
CX31 On-Highway Transmission Lubricant Viscosities
CX31 and CX31 HT On-Highway Transmissions Transmission Operation
CX31 and CX31 HT On-Highway Transmissions Breather (Transmission) - Clean
CX31 and CX31 HT On-Highway Transmissions Magnetic Screen (Transmission) - Clean
CX31 and CX31 HT On-Highway Transmissions Oil Filter (Transmission) - Replace
CX31 and CX31 HT On-Highway Transmissions Transmission Oil - Change
CX31 and CX31 HT On-Highway Transmissions Transmission Oil Level - Check
CX31 and CX31 HT On-Highway Transmissions Transmission Oil Sample - Obtain
CX31 and CX31 HT On-Highway Transmissions Reference Material
Installation Procedure of International Protection Rating (IP32) for the UPSB505{4480} Installation Procedure of International Protection Rating (IP32) for the UPSB505{4480}
C15 Petroleum Engines Auxiliary Water Pump - Remove
C15 Petroleum Engines Auxiliary Water Pump - Install
UPS 1000Z, UPS 1200Z, UPS500G and UPS600G Uninterruptible Power Supplys Transfer Operation
793F Off-Highway Truck Machine Systems Valve (Suspension Cylinder Charging) - Remove and Install - Front Suspension Cylinder
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.