C15 Petroleum Engines Caterpillar


Engine Oil Cooler - Install

Usage:

C15 HAZ

Installation Procedure

Table 1
Required Tools 
Tool  Part Number  Part Description  Qty 
1U-6396  O-Ring Assembly Compound 


NOTICE

Keep all parts clean from contaminants.

Contaminants may cause rapid wear and shortened component life.




    Illustration 1g02436065

  1. Install O-ring seal (9) on oil cooler bonnet (10). Apply Tooling (A) to the O-ring seal.

  2. Install integral seal (12) on oil cooler bonnet (10). Position oil cooler bonnet (10) on the water pump and install bolts (11).

  3. Install O-ring seals (7) on the engine oil filter base.

  4. Slide core assembly (6) toward the front of the engine. Rotate the core assembly into position. Install bolts (8).


    Illustration 2g02436063

  5. Install O-ring seal (5) on bonnet (4). Apply Tooling (A) to the O-ring seal. Place integral seal (2) and bonnet (4) in position. Install bolts (3).

  6. Connect hose assembly (1) to bonnet (4).

  7. Fill the cooling system with coolant to the correct level. Refer to Operation and Maintenance Manual, "Refill Capacities" for more information.

Caterpillar Information System:

2011/02/24 Wheel Loader Bucket Lifting Point Color Change {6001, 6101, 6102, 6104, 6110, 6131, 6132, 6529, 6531, 6704}
CX31 and CX31 HT On-Highway Transmissions Capacities (Refill)
CX31 On-Highway Transmission Lubricant Viscosities
CX31 and CX31 HT On-Highway Transmissions Transmission Operation
CX31 and CX31 HT On-Highway Transmissions Retarder Operation
C15 Petroleum Engines Engine Oil Cooler - Remove
C15 and C18 Industrial Engines Clean Emissions Module
C15 Petroleum Engines Engine Oil Filter Base - Install
C15 Petroleum Engines Engine Oil Filter Base - Remove
Assembling and Installing a Selective Catalytic Reduction (SCR) Module for Certain 3516C Generator Sets{1050, 108D, 7279} Assembling and Installing a Selective Catalytic Reduction (SCR) Module for Certain 3516C Generator Sets{1050, 108D, 7279}
2011/02/24 Procedure for Improving Battery Life on Generator Sets {1401}
2011/05/16 Improved Software is Now Used for the TH48-E80 Petroleum Transmissions and the SPF343C Pumpers {7620}
621H, 623H and 627H Wheel Tractor-Scrapers Braking and Hydraulic Fan System Pressure Sensor (Brake Oil Accumulator)
C8.7 Marine Engines Battery - Test
UPSB505 Uninterruptible Power Supply Circuit Breaker Recommendation
TA19 Transmission Transmission - Disassemble
CX31 and CX31 HT On-Highway Transmissions Safety Messages
CX31 and CX31 HT On-Highway Transmissions Serial Number Plate
CX31 and CX31 HT On-Highway Transmissions Transmission Control
CX31 and CX31 HT On-Highway Transmissions Maintenance Recommendations
CX31 and CX31 HT On-Highway Transmissions Breather (Transmission) - Clean
CX31 and CX31 HT On-Highway Transmissions Magnetic Screen (Transmission) - Clean
CX31 and CX31 HT On-Highway Transmissions Oil Filter (Transmission) - Replace
CX31 and CX31 HT On-Highway Transmissions Transmission Oil - Change
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.