Electronic Display Module
The instrument panel contains the following controls: Caterpillar monitoring system, control switches for the Caterpillar monitoring system, gauges, emergency stop switch, status indicators for the backup electronic control module and Engine Control Switch (ECS). The Caterpillar monitoring system can display diagnostic code information from the engines Electronic Control Module (ECM). Three switches are used to select various operating modes and display modes. Refer to the Service manual for more information.
Show/hide table
 | |
| Illustration 1 | g02330862 |
Instrument panel (1) Gauge cluster (2) Scroll switch (3) Clear mode switch (4) LH/RH select switch (5) Emergency stop switch (6) Alarm silence switch (7) Ready indicator for the backup Electronic Control Module (ECM) (8) Backup Electronic Control Module (ECM) in control indicator (9) Engine control switch (ECS) | |
Show/hide table
 | |
| Illustration 2 | g02330863 |
Electronic monitoring system and gauge cluster (10) Shutdown (11) System Voltage (12) Overspeed (13) Low Coolant Level (14) Overcrank (15) Not in AUTO (16) Low Fuel Level (17) Low Oil Pressure (18) High Coolant Temperature (19) Low Coolant Temperature (20) LED Display | |
Caterpillar Information System:
C9.3 Industrial Engine and CX31-P600-C9I Petroleum Power Train Package After Starting Engine
C6.6 Industrial Engine Cooling System
CX28 On-Highway Transmission Lifting and Tying Down the Transmission
Loose Mounting Bolts on the Air Cleaner Mounting Bracket of C13 Engines in Fire Trucks Built by Pierce Manufacturing Company{1051} Loose Mounting Bolts on the Air Cleaner Mounting Bracket of C13 Engines in Fire Trucks Built by Pierce Manufacturing Company{1051}
3516B Marine Auxiliary Engine System Overview
C27 and C32 Industrial Engines Fuel Priming Pump - Remove and Install
C9.3 Engines for Caterpillar Built Machines Air Control Valve - Remove and Install - Control Module, Clean Emissions Module
Salvage and Reuse of Final Drive Axle Bearings Used in Off-Highway Trucks/ Tractors and 990 to 994 Wheel Loaders {4050, 4051} Salvage and Reuse of Final Drive Axle Bearings Used in Off-Highway Trucks/ Tractors and 990 to 994 Wheel Loaders {4050, 4051}
C9 On-highway Engines Configuration Parameters
3406C Industrial Engine Reference Information
C9 On-highway Engines Plate Locations and Film Locations
C15 and C18 Tier 4 Final Engines Water Temperature Regulator - Test
3054C and C4.4 Industrial Engine and Marine Auxiliary Engine Turbocharger
C4.4 (Mech) Marine Generator Set MCS-3 Heat Exchanger
312E, 312F, 313F, 316E, 316F, 318E, 318F, 320E, 320F, 323E, 323F, 324E, 325F, 326F, 329E, 329F, 330F, 335F, 336E, 336F, 340F, 349E, 349F, 352F, 374F and 390F Excavators and 336E MHPU and 349E MHPU Mobile Hydraulic Power Units Air Conditioning and Hea Refrigerant Expansion Valve
3054C and C4.4 Industrial Engine and Marine Auxiliary Engine Alternator and Regulator
C7.1 Marine Engine Electric Starting Motor - 24 V
C7.1 Marine Engine Electric Starting Motor - 12 V
C15 and C18 Engines Refill Capacities
C32 Petroleum Engines Fluid Recommendations
C9.3 Industrial Engine and CX31-P600-C9I Petroleum Power Train Package Refill Capacities
2010/11/29 Annunciator Film Kit Is Now Available for EMCP 4 On Cat Generator Sets {4490, 7400}
C3.4B Engines For Caterpillar Built Machines Engine Design
CX28 On-Highway Transmission Reference Material