Exhaust Sensor Lines - Remove and Install - For Series Turbocharger Applications
拆卸步骤
Show/hide table
所需工具     | |||
工具     | 零件号     | 零件描述     | 数量     |
A     | 207-1600 (1)     | 橡胶润滑剂     | 1     |
207-1601 | 橡胶润滑剂     | 1     |
Show/hide table
( 1 ) | 用于 EAME |
开始:
- 拆下烟气处理总成。
- 拆下螺栓 (2) 后断开接头 (4) 。
Show/hide table
图 1 | g02131534 |
发动机后视图 |
- 断开接头 (1) 并拆下管组件。
- 松开卡箍组件 (6) 和 (3) 。 拆卸管组件 (5) 。
- 拆下螺栓 (7) ,然后拆下卡箍组件。
- 拆下螺栓 (11) ,然后拆下管组件 (12) 。
Show/hide table
图 2 | g02824177 |
- 断开线束组件 (10) 。
- 松开卡箍组件 (8) 后拆下排气文丘里管 (9) 。
- 拆下压力传感器 (13) 。
Show/hide table
图 3 | g02824196 |
- 拆下螺栓 (15) 。 将压差传感器 (14) 从文丘里管 (16) 上拆下。
安装步骤
- 按与拆卸相反的顺序安装排气传感器管路总成。
- 将工具 (A) 涂抹到拆下的所有 O 形密封圈上。
- 将压力传感器 (13) 拧紧至扭矩为 10 ± 2 N·m (89 ± 18 lb in)。
- 拧紧螺栓 (15) 至扭矩为 10 ± 2 N·m (89 ± 18 lb in)。
- 将卡箍组件 (3) 、 (6) 和 (8) 拧紧至扭矩为 8.5 ± 2 N·m (75 ± 18 lb in)。
Caterpillar Information System:
Contamination Control Guideline Reference Manual Contents Page{0374, 1000, 1348, 3080, 5050, 5095, 7000, 7577, 7579} Contamination Control Guideline Reference Manual Contents Page{0374, 1000, 1348, 3080, 5050, 5095, 7000, 7577, 7579}
2010/04/16 New Electronic Control Governor for Certain C2.2 Engines {1901, 1920}
C7.1 Industrial Engine and Generator Set Soot Sensor - Test
336E Excavator and 336E MHPU Mobile Hydraulic Power Unit Machine Systems Final Drive - Assemble
336E Excavator and 336E MHPU Mobile Hydraulic Power Unit Machine Systems Final Drive - Disassemble
SR5 Electric Power Generation Rewind Data - SR5 Winding Data for 3000 Frame
SR5 Electric Power Generation Rewind Data - SR5 Winding Data for 1800 Frame
SR5 Electric Power Generation Rewind Data - SR5 Winding Data for 1400 Frame
SR5 Electric Power Generation Rewind Data - SR5 Winding Data for 1600 Frame
SR5 Electric Power Generation Rewind Data - SR5 Component Views
C13, C15, and C18 Tier 4 Interim Engines ARD Fuel Pressure Is Low
C13, C15, and C18 Tier 4 Interim Engines ARD Fuel Pressure Is High
C15 and C18 Industrial Engines Exhaust Gas Valve (NRS) - Remove and Install
C9.3 Tier 4 Final Engines Electric Starting System - Test
C2.2 Generator Sets Model View Illustrations
SR5 Electric Power Generation Rewind Data - SR5 General Information
SR5 Electric Power Generation Rewind Data - SR5 Connection Diagrams for Exciter
SR5 Electric Power Generation Rewind Data - SR5 Connection Diagrams for Main Stator and Main Rotor
SR5 Electric Power Generation Rewind Data - SR5 Generator Identification
SR5 Electric Power Generation Rewind Data - SR5 Terminology
C15 and C18 Industrial Engines Diesel Particulate Filter
C27 and C32 Engines for Caterpillar Built Machines Air Inlet and Exhaust System
824K Wheel Dozer, 825K Soil Compactor and 826K Landfill Compactor Machine Systems Solenoid Valve (Brake Accumulator Charge)
The Configuration of the Jacket Water Heater System for C9 Generator Sets Has Been Improved{1383} The Configuration of the Jacket Water Heater System for C9 Generator Sets Has Been Improved{1383}