Gear Motor (Rear Axle Lubrication) - Assemble
组装步骤
- 安装轴密封 (23) 、挡圈 (22) 和轴密封 (21) 。
Show/hide table
 | |
| 图 1 | g02122458 |
- 将密封 (20) 和密封 (19) 安装到衬套 (18) 上。
Show/hide table
 | |
| 图 2 | g02122457 |
- 安装衬套 (18) 。 安装主动齿轮 (17) 和从动齿轮 (16) 。
Show/hide table
 | |
| 图 3 | g02122456 |
- 安装 O 形密封圈 (15) 。
Show/hide table
 | |
| 图 4 | g02122455 |
- 将密封 (14) 和密封 (13) 安装到衬套 (12) 上。
Show/hide table
 | |
| 图 5 | g02122454 |
- 安装泵体 (12) 。 安装衬套 (11) 。 安装 O 形密封圈 (10) 。
Show/hide table
 | |
| 图 6 | g02122437 |
- 安装支撑环 (9) 和 O 形密封圈 (8) 。 安装线圈组件 (7) 和螺母 (6) 。 将螺母 (6) 拧紧至扭矩为 6 至 7 N·m (53 至 62 lb in)。
Show/hide table
 | |
| 图 7 | g02118693 |
- 安装电磁阀 (5) 。 拧紧电磁阀 (5) 至扭矩 23 至 27 N·m (17 至 20 lb ft)。
Show/hide table
 | |
| 图 8 | g02118665 |
- 安装单向阀 (4) 。 拧紧单向阀 (4) 至扭矩 23 至 27 N·m (17 至 20 lb ft)。
Show/hide table
 | |
| 图 9 | g02122356 |
- 安装盖 (3) 。 安装螺栓 (2) 。
Show/hide table
 | |
| 图 10 | g02118662 |
- 安装连接器 (1) 。
Show/hide table
 | |
| 图 11 | g02118576 |
End By: 安装齿轮马达（后桥泵驱动）。
Caterpillar Information System:
797F Off-Highway Truck Power Train Gear Motor (Rear Axle Lubrication) - Disassemble
C15 and C18 Engines for Caterpillar Built Machines Camshaft
C15 and C18 Industrial Engines Camshaft
797F Off-Highway Truck Power Train Gear Motor (Rear Axle Lubrication) - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines Compression Brake
EMCP4.3/4.4 Electronic Control Module (Generator Set)
2010/03/25 An Updated Fuel Pressure Is Used In System Operation, Testing and Adjusting Manuals For C27 and C32 Machine Engines {1250, 1256}
2010/03/25 An Updated Fuel Pressure Is Used In System Operation, Testing and Adjusting Manuals For C27 and C32 Engines {1250, 1256}
C9.3 Tier 4 Final Engines Belt Tensioner
C13, C15, and C18 Tier 4 Final Engines Engine Oil Pan
C13, C15, and C18 Tier 4 Final Engines Boost Pressure Sensor
C15 Petroleum Generator Set Engines Speed/Timing Sensor
C15 Engine for Caterpillar Built Machines Engine Design
C15 and C18 Engines for Caterpillar Built Machines Engine Oil Cooler - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines Pressure Sensor (NOx Reduction System)
C15 and C18 Engines for Caterpillar Built Machines Temperature Sensor (NOx Reduction System)
C11 and C13 Engines Muffler
C11 and C13 Engines Muffler
G3520E Generator Set Engines Piston and Rings
2010/03/05 A New Spark Plug Is Used on some G3500 Generator Set Engines {1550, 1555}
C15 and C18 Engines for Caterpillar Built Machines Engine Oil Filter Base - Remove and Install
C13, C15, and C18 Tier 4 Final Engines Fuel Priming Pump and Primary Fuel Filter - With Water Separator
C13 Industrial Engines Fuel Priming Pump and Primary Fuel Filter - With Water Separator
C13 Industrial Engines Fuel Priming Pump and Primary Fuel Filter - With Water Separator