Fuel Injection Lines
Show/hide table
| |
| Illustration 1 | g03797708 |
Show/hide table
| Specification for 344-9102 Fuel Rail Gp | |||
| Item | Qty | Part | Specification Description |
| 1 | 1 | - | Tube assembly to be tightened for single use. Tube is loosened or removed after tightening, tube is to be discarded and replaced. |
| Use the following procedure in order to tighten the Fuel Lines Group (5) and Fuel Lines (6): 1. Install bolts (3) and hand tighten the bolts. 2. Install a new fuel line (6). Hand tighten the fuel line nuts (7) on each end of the fuel line. Repeat for the remaining fuel lines. 3. Install clamps (1), (2), (4), and (5) for the fuel lines and install the nuts. Thread the nuts onto the studs by two full turns. Make sure that the rubber grommets are in place in clamps (1), (2), (4), and (5). 4. Tighten the fuel line nut (7) at the fuel rail to a torque of 5.Tighten bolts (3) to standard torque. 6. Tighten the fuel line nut (7) at the pump and the quill assemblies to 7. Tighten the nuts for clamps (1), (2), (4), and (5) . |
|||
Caterpillar Information System:
789D, 793F, and 797F Off-Highway Truck Monitoring System Display Module
789D, 793F, and 797F Off-Highway Truck Monitoring System Diagnostic Operation
3508C, 3512C, and 3516C Locomotive Engines Exhaust Has Excessive Black Smoke
C18 Marine Generator Set Refill Capacities and Recommendations
C9.3 Tier 4 Final Engines Cylinder Block Cover Group
3508C, 3512C, and 3516C Locomotive Engines Engine Stalls at Low RPM
789D, 793F, and 797F Off-Highway Truck Monitoring System Diagnostic Code List
789D, 793F, and 797F Off-Highway Truck Monitoring System Diagnostic Capabilities
Installation for the Universal Network Interface (UNI) Board{4480} Installation for the Universal Network Interface (UNI) Board{4480}
789D, 793F, and 797F Off-Highway Truck Monitoring System Connector Locations
789D, 793F, and 797F Off-Highway Truck Monitoring System Monitoring System
2009/06/08 Fuel Injection Pump {1251, 1280, 1290}
C18 Marine Generator Set Cold Weather Operation
C9.3 Engines for Caterpillar Built Machines Solenoid Valve (Exhaust Balance) - Remove and Install
3516B Engine for 994F and 994H Wheel Loaders Exhaust Has Excessive White Smoke
789D, 793F, and 797F Off-Highway Truck Monitoring System General Information
3508C, 3512C, and 3516C Locomotive Engines Exhaust Temperature Is High
789D, 793F, and 797F Off-Highway Truck Monitoring System Power Supply Circuit
789D, 793F, and 797F Off-Highway Truck Monitoring System Self Test
789D, 793F, and 797F Off-Highway Truck Monitoring System MID 053 - CID 0533 - FMI 09
789D, 793F, and 797F Off-Highway Truck Monitoring System MID 053 - CID 0533 - FMI 14
789D, 793F, and 797F Off-Highway Truck Monitoring System MID 053 - CID 0800 - FMI 09
C9.3 Tier 4 Final Engines Electronic Unit Injector Wiring
789D, 793F, and 797F Off-Highway Truck Monitoring System MID 053 - CID 0800 - FMI 14