The engine speed is above 2100 RPM for more than 0.6 seconds.
Note: This event code represents an event. This does not represent an electronic system fault.
Note: The electronic service tool can be used to change the limit for engine overspeed.
System Response:
The event code will be logged.
The warning light on the control panel will flash.
The event may be viewed by using a display module or by using the electronic service tool.
The fuel injection will be switched OFF.
Possible Performance Effect:
E362-1
None
Troubleshooting:
Test Step 1.
This event indicates excessive engine speed. This event does not represent a fault in the Engine Control Module (ECM).
This event does not represent a fault in the circuit for the speed/timing sensors.
No troubleshooting is required.
Results:
- OK - STOP