973K Track-Type Loader Machine Systems Caterpillar

Removal Procedure

Show/hide table

Illustration 1	g06243657

1. Remove two screws (1) and cover (2).
   Show/hide table

   Illustration 2	g06243702

2. Remove four screws (3) , three screws (6) , clip screw (4) , and cover (5).
   Show/hide table

   Illustration 3	g06243714

3. Cut three cable straps (7) , disconnect harness assembly, (8) and reposition out of the way.
   Show/hide table

   Illustration 4	g06243718

4. Remove three screws (9) and remove cover (11) . Remove six screws (10) and joystick controls (12) down out the bottom.

Installation Procedure

1. Install joystick controls (12) in the reverse order of removal.

   1. Tighten screws (9) to a torque of 3 ± 0.25 N·m (2.2 ± 0.2 lb ft).

   2. Tighten screws (3) to a torque of 6 ± 1 N·m (4.4 ± 0.7 lb ft) .

   3. Tighten screws (6) to a torque of 3 ± 0.25 N·m (2.2 ± 0.2 lb ft).

   4. Tighten screws (1) to a torque of 6 ± 1 N·m (4.4 ± 0.7 lb ft) .