986H Wheel Loader Machine Systems Caterpillar

Removal Procedure

Start By:

1. Release the hydraulic system pressure.

2. Connect the steering frame lock.

3. Remove the cab.

Show/hide table

Personal injury can result from hydraulic oil pressure and hot oil. Hydraulic oil pressure can remain in the hydraulic system after the engine has been stopped. Serious injury can be caused if this pressure is not released before any service is done on the hydraulic system. Make sure all of the work tools have been lowered to the ground, and the oil is cool before removing any components or lines. Remove the oil filler cap only when the engine is stopped, and the filler cap is cool enough to touch with your bare hand.

Show/hide table

Illustration 1	g06110083

1. Disconnect hose assemblies (1), (2), (3), and (4).
   Show/hide table

   Illustration 2	g06110088

2. Disconnect hose assemblies (5).
   Show/hide table

   Illustration 3	g06110090

3. Remove bolts (6).
   Show/hide table

   Illustration 4	g06110125

4. Remove bolt (7). Remove steering control valve (8).

Installation Procedure

1. Install steering control valve (8) in the reverse order of removal.